Glue-on set RUNA
What is the Hoofstar Glue Tab System? No welding, no trimming, and no tools are needed for the RUNA glue-on shoe. You receive a ready-to-use hoof protection that just needs to be attached to the hoof with super glue. Thanks to the unique tap-to-fit mechanism, you can adjust the size to the millimeter – no complicated fitting required. Everything you need for the application comes in the starter kit – including glue, cleaning wipe, and illustrated instructions. Why RUNA? ✅ Quick and easy to apply: Each glue tab is attached within seconds while your horse stands comfortably. No tools required – the size is adjusted with a simple tap. ✅ Maximum comfort & freedom of movement The flexible plastic perfectly adapts to the hoof. Natural hoof movement remains unrestricted. Shoe without metal core. ✅ Reusable & sustainable: Reusable multiple times: Remove, trim the hooves, and glue them back on. Saves money and resources! How it works: Preparation: Roughen the hoof wall with a rasp and make sure it’s clean and dry. Adjustment: Set the correct size. Application: Secure to the hoof with just 10 tabs and super glue. Done – your horse can walk off right away! 🐎 Which version suits you? Starter Kit (1 pair of RUNA + glue + cleaning wipe + instructions) – €69 Single shoe – €32 Size Chart Size Hoof Width Max. Hoof Length 14 13.8 - 14.7 cm 14.5 cm 13 12.7 - 13.9 cm 14 cm 12 11.6 - 12.8 cm 13 cm 11 10.9 - 11.9 cm 12 cm 10 9.7 - 10.9 cm 10.9 - 11.1 cm Is your horse between two sizes? Then take a close look at the hoof shape: Does the hoof widen toward the heel (triangular shape)? → Choose the smaller size and adjust it to the widest setting. Is the hoof more round? → Choose the larger size and adjust it to the smallest setting. Why Hoofstar? Hoofstar stands for innovative, sustainable, and horse-friendly hoof protection solutions. RUNA is the perfect alternative to traditional horseshoes or glue-on systems – lightweight, durable & reusable. 👉 Order your RUNA glue-on shoe now and take your hoof care to the next level! Product safety information: RUNA Glue Tab System – set including glue and alcohol wipe, with screws and nuts, or as a single shoe with screws and nuts. Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
RUNA Limited Edition “Fire Horse”
Untamed energy, dynamic drive, explosive power – concentrated in an elegant design that can be glued on in minutes. The RUNA “Fire Horse” Edition celebrates the Chinese Year of the Horse with a bold look: one side red, one side orange. Visible. Full of character. 100% RUNA glue-on horseshoe. Why RUNA “Fire Horse”? Power at the hoof: The red/orange duo stands for forward drive and presence – perfect for training, trail rides, and competitions. Elegance meets simplicity: RUNA arrives ready to use. In just a few minutes you adjust it – without tinkering, without tech stress, and without any crafts background. Quick to glue: Apply super glue thinly, press each tab evenly for 5–10 sec. – done. Secure hold: On degreased, dry, freshly roughened horn, the glue-on shoe holds reliably. Made in Germany: Developed and produced in Nordfriesland – made locally, shipped directly. Application in 4 steps (RUNA glue-on horseshoe) Adjust: Set the RUNA glue-on horseshoe to the hoof width and lock it in place (simple screw click system). Roughen: Carefully roughen the hoof wall with the fine side of the rasp (remove patina/dirt). Degrease: Clean with an alcohol wipe (included in the starter set) and let it evaporate briefly. After that, do not touch with bare hands. Glue: Apply super glue thinly to each tab, press 10 sec. per tab. Let it cure briefly – and you’re ready to go. Good to know Limited Edition: available only while supplies last. Repairable: With the RUNA Repair Kit, the inner liner can be replaced if needed – remove/file off old glue residue beforehand. Choosing the size: As usual with RUNA, choose based on hoof width. Fire Horse size chart Size Hoof width Max. hoof length 14 13.8 – 14.7 cm 14.5 cm 13 12.7 – 13.9 cm 14 cm 12 11.6 – 12.8 cm 13 cm 11 10.9 – 11.9 cm 12 cm 10 9.7 – 10.9 cm 10.9 – 11.1 cm Between two sizes? Wider at the heels (triangular)? → choose the smaller size and adjust it to the maximum width. More round? → choose the larger size and adjust it as small as possible. Product safety information Glue-tab system RUNA Fire Horse, as a set with glue and alcohol wipe including screws and nut, or as a single shoe with screws and nuts. Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
RUNA Nordic Sun
The popular RUNA glue-on shoe is now available in Ice Blue – only for a short time! RUNA arrives ready to mount, is quickly adjusted, and is applied with cyanoacrylate (super glue) directly on the standing hoof. No trimming, no welding, and an open sole for a natural feel. Highlights Fast & easy: Delivered ready to use, size adjustment via click interlock + screw, then glue each tab in sequence. Cyanoacrylate principle: Apply thinly, press each tab for 5–10 sec – no preheating needed. Open sole: Breathable, easy to clean – ideal for everyday use and training. Made in Germany: Designed, tested, and produced in the north – direct from the manufacturer. Limited Edition: Trend color Ice Blue – only while stocks last. Quick how-to Determine hoof width, set RUNA via click interlock and fix with the screw. Spread tabs one by one, apply cyanoacrylate thinly, press for 5–10 sec. After gluing, rasp off any excess if needed. Tip: For extra grip, our tungsten-carbide studs (Widia) can be inserted into the designated holes (up to 6 per hoof). Use caution on hind hooves/loose housing because of injury risk. How to glue – short & sweet Prepare: Thoroughly roughen the hoof with the fine side of the hoof rasp. Keep the rasp clean and grease-free. Thoroughly degrease. After roughening, do not touch the hoof with your hands to avoid re-contamination. Adjust: Set the size, click in the bridge, fix with the countersunk screw. Glue: Apply cyanoacrylate (RUNA) to clean, dry, fresh horn – place, press, done. All steps in the video tutorial. Variants & pricing Starter kit (1 pair of RUNA + glue + cleaning wipe + instructions) – €75 Single shoe – €37 Sizes Size Hoof width Max. hoof length 14 13.8–14.7 cm 14.5 cm 13 12.7–13.9 cm 14 cm 12 11.6–12.8 cm 13 cm 11 10.9–11.9 cm 12 cm 10 9.7–10.9 cm 10.9–11.1 cm Between two sizes? Wider toward the heels (triangular)? → choose the smaller size and set to the maximum width. More round? → choose the larger size and set as small as possible. Why Hoofstar Since 2016 we’ve been developing simple, durable, well-thought-out hoof protection solutions – Made in Germany. RUNA combines function, comfort, and sustainability. 👉 Order RUNA in Ice Blue Product safety information RUNA adhesive tab system Ice Blue, available as a set with glue and alcohol wipe including screws and nut, or as a single shoe with screws and nuts. Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Snow grip for RUNA
Snow Grip for Hoofstar RUNA Everything for secure footing in winter: The Snow Grip for Hoofstar RUNA is inserted into the RUNA glue-on shoe and reliably prevents snow and mud from “balling up” in the open sole. This keeps the tread surface clear – your horse has noticeably better traction in slush, on wet grass, and on frozen ground. Product Highlights No more snowballing – keeps the RUNA sole clear in winter Precision fit for Hoofstar RUNA – screws into the shoe, nothing wobbles or rubs Flush-mounted – the supplied screws are fully countersunk, no contact with the hoof Light & robust – unobtrusive in use, clearly effective Install before gluing – quick to fit, then glue on the RUNA as usual Important sizing note Please always order the matching size: For each RUNA shoe size you need the identical Snow Grip size. Available for all RUNA sizes (sizes 10 to 14). (Example: RUNA size 12 ⇒ Snow Grip size 12.) Assembly (before gluing) Check/set the RUNA size. Place the Snow Grip in the designated position and screw it firmly with the included screws – countersink all screws completely flush. Glue the RUNA to the hoof as usual. Notes Only suitable for Hoofstar RUNA. Please install before the gluing process. Scope of delivery 2× Snow Grip inserts (for one pair of RUNAs) 4× countersunk screws 4× press-in nuts 1× hex key Questions about sizing or installation? Get in touch – we’ll help you quickly. 🧡 Product safety information: RUNA Snow Grip (2 pieces) for inserting into the RUNA glue-on shoe Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Content: 2 piece (€7.90 / 1 piece)
Repair Kit RUNA
RUNA Repair Kit – Sticks like newWhen removing the RUNA, the soft black inner material may come off or stick to the hoof – not a big deal, but essential for the next application. That’s exactly what our Repair Kit is for: it helps you get your RUNA back in shape in no time.Perfect if you want to reuse your RUNA and count on a secure fit.What’s included?Inner pads for 1 RUNA glue-on shoe4 cleaning wipes💡 Tip: Superglue doesn't stick to itself – make sure to remove old glue residues first. Best done with our cleaning brush for the cordless drill, available in our shop.Mini File – Quick fix for glue areasIf a flap comes loose while you're out and about, our handy mini file is just what you need. Use it to roughen the surface quickly and precisely – for secure re-gluing at the barn or on the go. Fits in any pocket, a must-have in every tack room.🔧 Available here: https://hoofstar.com/Feile-Miniraspel-runaProduct Safety Information:Kit for repairing the side flaps of the RUNA glue-on shoeManufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Hoofstar RUNA Wedge (1–5°)
Hoofstar RUNA wedges – insert for the glue-on shoe (therapeutic, 1–5°) Precision wedges for angle adjustment in the RUNA glue-on shoe. The inserts are sold individually per shoe – so you can use different heights on the left and right when this makes therapeutic sense. Developed exclusively for RUNA (not compatible with other Hoofstar glue-on products). Use & benefits Wedges can – in consultation with your veterinarian and a professional hoof care provider – help to fine-tune the hoof angle, temporarily relieve the heels and optimise breakover. This can be useful, for example, for temporary corrections of toe/heel alignment, during rehabilitation or for fine balance adjustment of individual hooves. Important notes Therapeutic product: use only by professional hoof trimmers/farriers or where a veterinarian recommends the use of a wedge. Compatibility: exclusively for Hoofstar RUNA. Unit: 1 wedge (per hoof). Variants: 1–5° (in 1° increments), sizes matching RUNA (e.g. 10–14). Custom height needed? We manufacture special sizes on request – please email us at info@hoofstar.com Installation video: In our video we show how the wedges are installed in the RUNA glue-on shoe. Key benefits at a glance Perfect fit for RUNA – quick to insert, secure fit Fine degree increments for therapeutic adjustments Available individually → allows asymmetric adjustments Developed & produced in Germany Note: wedges change hoof mechanics. Please always determine diagnosis, wedge angle and wear duration together with qualified professionals. Product safety information: RUNA wedge (1 piece), plate to be placed in the RUNA glue-on shoe Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
RUNA Nordic Sun
RUNA Glue-On: on, holds, go RUNA makes gluing easy: no welding, no trimming, no special tools. Set the size, add superglue – you’re off. Fits in minutes: Adjust width with the included bridges. Snap in, secure with the recessed screw—done. The starter kit has everything: glue, cleaning wipe, screws, instructions. Why RUNA ✅ Fast to mount Tabs fixed in seconds – your horse stays relaxed, hoof on the ground. No fiddling, no holding the hoof up. ✅ Moves like the hoof Flexible plastic conforms to the hoof contour. Supports natural mechanics – no metal core. ✅ Reusable Re-glue after hoof care and keep riding. Easy on your budget and the environment. Color: Nordic Sun Monochrome. Clean. Nordic. RUNA in Nordic Sun adds a calm, bright accent – a crisp single-color look instead of a color mix. How to glue – short & sweet Prepare: Thoroughly roughen the hoof with the fine side of a hoof rasp. Keep the rasp clean and free of grease. After roughening, do not touch the hoof with bare hands. Adjust: Set the size, snap in the bridge, secure with the recessed screw. Bond: Apply superglue (RUNA) to clean, dry, fresh horn – place, press, done. See all steps in the video tutorial. Variants & prices Starter kit (1 pair RUNA + glue + cleaning wipe + instructions) – €75 Single shoe – €37 Sizes Size Hoof width Max. hoof length 14 13.8–14.7 cm 14.5 cm 13 12.7–13.9 cm 14 cm 12 11.6–12.8 cm 13 cm 11 10.9–11.9 cm 12 cm 10 9.7–10.9 cm 10.9–11.1 cm Between two sizes? Wider toward the heels (triangular)? → choose the smaller size and set it to maximum width. More round? → choose the larger size and set it as small as possible. Why Hoofstar Since 2016 we’ve built simple, durable, well-thought-out hoof protection – Made in Germany. RUNA blends function, comfort, and sustainability. 👉 Order RUNA in Nordic Sun Product safety information RUNA Nordic Sun glue-tab system, as a set with glue and alcohol wipe including screws and nut, or as a single shoe with screws and nuts. Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Superglue RUNA
Hoofstar RUNA Special Super Glue – Flexible, Strong & PreciseOur special super glue is specifically designed for securing Hoofstar RUNA adhesive horseshoes. Thanks to its elastic curing, it remains flexible and ensures a durable, high-strength bond – perfect for keeping your RUNA hoof boots securely in place.Why choose our RUNA glue?✅ Optimal viscosity – Flows easily, distributes evenly, and allows for quick application.✅ High tensile strength – Withstands extreme stress for a secure and stable hold.✅ Precise application – Enables pinpoint accuracy for effortless and targeted bonding.Choose quality, durability, and maximum adhesion – for an adhesive horseshoe that truly lasts!Angaben zur Produktsicherheit:Sekundenkleber, Cyanacrylat Kleber, MD-Glue 4850Hersteller und verantwortliche Person:Marston-Domsel GmbH, Bergheimer Str. 15, 53909 Zülpich, www.marston-domsel.de
File mini rasp RUNA
Our square nail file with a coarse grit of 80/80 is the ideal tool for the precise processing and repair of RUNA adhesive fittings. Thanks to its stable shape and double-sided grit, it offers reliable and even sanding performance.Grit 80/80: Coarse-grained and ideal for quick, effective corrections.Square shape: Enables precise work even in hard-to-reach areas.Use this file to remove excess glue from the hoof and RUNA adhesive shoeing. You can then simply glue the shoe back on. Size: 17.78 cm x 2.79 cm x 0.51 cmInformation on product safety:Nail file, file 80/80 grit Manufacturer:Room A2405, Building 2, HengyuJiacheng, Longgang District, 518000, Guangdong Province, ShenzhenE-mail: zpeizeng@gmail.com, Tel: +86 13631599510Responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
glue-u Shu cleaner
Glue-U Shu Cleaner – Cleanliness that lastsWhen it comes to bonding, one thing matters most: a clean surface. The Glue-U Shu Cleaner makes it easy. Degrease the hoof, clean the surface – and you’ve got the perfect foundation for a strong, reliable adhesive bond.Especially with the RUNA adhesive shoe, degreasing is essential. Instead of struggling with alcohol wipes, simply use the spray: generously apply to the hoof, let it sit briefly, and blow dry – done. It couldn’t be more efficient.Acetone-free & residue-free: Evaporates cleanly without leaving traces.No wiping required: Unlike foam cleaners, no extra work needed.Quick application: Shake the can, spray – and the hoof is ready.For pros & practitioners: Saves time and ensures reliable results.Application:Shake can well before use. Generously spray the surface to be cleaned (hoof or adhesive area) from a distance of 20–30 cm. If necessary, work in with a brush. Spray again and allow to dry or blow dry.With Shu Cleaner, you’re on the safe side – because strong bonds always start with a clean surface.Product safety information:Acrylate adhesive in 150ml coaxial cartridge, ShubondManufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/
Content: 0.75 Liter (€13.20 / 1 Liter)
RUNA Orange
Hoofstar RUNA Klebebeschlag – Sonderfarbe Neon-Orange (limitiert) Auffällig, sicher, easy geklebt: Unser RUNA in knalligem Orange sorgt für maximale Sichtbarkeit und bewährten Schutz – perfekt für Training, Ausritt & Offenstall (mit Rücksicht auf Herdenhaltung, siehe Hinweis). Die Sonderedition ist exklusiv in Größe 10 verfügbar und auf nur 40 Stück limitiert. Wenn weg, dann weg. Highlights Sonderfarbe Neon-Orange – starke Sichtbarkeit & frischer Look (Limited Edition). RUNA = fertig & anpassbar – kein Schweißen, kein Zuschneiden; Größe per Verzahnung einstellen, anschließend mit Schrauben fixieren. Offene Sohle – leicht, flexibel, nah am Barhuf-Gefühl. Schnelle Montage – Klebelaschen zügig anlegen, wenige Sekunden andrücken. Optional mehr Grip – vorgebohrte Löcher für Widia-Stifte (Wolframcarbid), wiederverwendbar, ideal bei Nässe, Eis oder Asphalt. Made in Germany – Entwicklung, Test & Produktion im Norden. Passform & Größe Verfügbar nur in Größe 10 (limitiert auf 40 Stück). Für die Größenfindung gilt: Breiteste Stelle des Hufs messen, RUNA am Huf probeaufsetzen, Verzahnung einklicken, mit Schrauben sichern – für passgenauen Sitz. Montage – kurz & klar Huf vorbereiten: Klebeflächen gründlich mit der feinen Raspelseite anrauen; Huf muss sauber, trocken, nicht geölt und nicht entfettet sein. Nach dem Anrauen nicht mehr mit bloßen Händen berühren. RUNA einstellen & fixieren: Verzahnung einklicken, mit Schrauben gegen Verstellen sichern. Laschen kleben: Laschen einzeln abspreizen, Kleber auftragen, 5–10 Sek. andrücken; danach Überstände sauber verrunden/kürzen. Tipp: Für zusätzliche Traktion Widia-Stifte einschrauben (bis zu 6 pro Huf). Bei Hinterhufen & im Herdenbetrieb mit Bedacht einsetzen (Verletzungsrisiko). Nicht für häufiges Ein-/Ausschrauben gedacht. Warum Klebebeschläge? Kunststoff-Klebebeschläge sind leicht, stoßdämpfend und laufen sich nahezu wie barhuf. Sie sind eine hervorragende Alternative, wenn Nageln nicht gewünscht ist oder Hufschuhe an Grenzen stoßen. Andere Größe gesucht? Schau dir RUNA WINTERSONNE in Orange an Angaben zur Produktsicherheit: Klebelaschen System RUNA Orange, Set mit Kleber und Alkoholtuch mit Schrauben und Mutter oder als Einzelschuh mit Schrauben und Muttern Hersteller und verantwortliche Person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Spare screw set
To ensure that your ‘Runa’ hoof boot is always securely fastened, we offer you a small replacement screw set with 2 screws and the matching nuts. Especially with intensive use, it can happen that a screw gets lost - with this set, you always have the right solution to hand.Perfect for private useThis set is ideal for horse owners who use their ‘Runa’ hoof boot regularly and want to ensure that it always fits perfectly. Each application requires two screws and nuts per shoe, and if a screw is missing, you have a replacement quickly to hand with this set. This way, you can easily reattach your hoof boot and your horse remains protected.Compact and practicalThe set contains exactly two screws and the corresponding nuts - exactly the amount you need for one shoe. This means you have everything you need to firmly reattach your hoof boot.High quality and durableThe nuts and bolts are made of durable, rustproof material that fulfils the requirements of the hoof boot sector. They are resistant to moisture, dirt and other influences that can occur during daily use and therefore offer a long service life.SummaryWith the replacement screw set for the ‘Runa’ hoof boot, you can be sure that you always have the right spare parts to hand. Two screws and nuts are all you need to reattach a hoof boot securely - ideal for end users.Product safety information:2 screws and 2 nuts for the RUNA adhesive horseshoe for size fixation Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Cleaning brush RUNA
You will need this cleaning brush if you need to use the RUNA adhesive fitting again and the black inner material has come loose or is uneven. Key-Facts: Ø 38 mm diameter brush Weight 30 g Disc brush with 6 mm clamping shaft for clamping in the drill Speed, max. min-1: 4500 rpm Safety instructions: Please wear safety goggles, dust mask and work gloves during use. Information on product safety: Accessories for drill, disc bits 38 mm diameter Manufacturer and responsible person: Robert Bosch Power Tools GmbH, Max-Lang-Strasse 40-46, 70771 Leinfelden-Echterdingen, https://www.bosch-pt.com
RUNA Arctic Berry
RUNA Glue-On: fast, clean, strong RUNA is the smart glue-on hoof protection that works instantly: No welding, no trimming, no special tools. Set the size, apply superglue – done. Comfort without compromise: Adjust the size using the included bridges. Simply snap in and secure with the recessed screw. The starter kit includes everything: glue, cleaning wipe, screws, instructions. Why RUNA? ✅ Ultra-fast application Each tab fixed in seconds – while your horse stands relaxed. No tinkering, no holding the hoof up. ✅ Mobility that adapts Flexible plastic hugs the hoof contour. Supports natural hoof mechanics – no metal core. ✅ Reusable & sustainable Re-glue after hoof care and keep riding. Saves money and resources. Color: Arctic Berry Monochrome. Clean. Bold. RUNA in Arctic Berry sets a calm, modern accent – pure look instead of color mix. Application – step by step Preparation: Thoroughly roughen the hoof with the fine side of a hoof rasp. Do not degrease or oil. Keep the rasp clean. After roughening, do not touch with bare hands. Adjustment: Set the size, snap in the bridge, secure with the recessed screw. Bonding: Use superglue (RUNA) on clean, dry, fresh horn – done. All steps in the video tutorial. Variants & prices Starter kit (1 pair RUNA + glue + cleaning wipe + instructions) – €75 Single shoe – €37 Size chart Size Hoof width Max. hoof length 14 13.8–14.7 cm 14.5 cm 13 12.7–13.9 cm 14 cm 12 11.6–12.8 cm 13 cm 11 10.9–11.9 cm 12 cm Between two sizes? Wider towards the heels (triangular)? → Choose the smaller size and set it to the maximum width. More round? → Choose the larger size and set it as small as possible. Why Hoofstar? Since 2016: simple, durable, well-thought-out hoof protection – Made in Germany. RUNA unites function, comfort, and sustainability. 👉 Order RUNA in Arctic Berry Product safety information Glue tabs system RUNA Arctic Berry, as a set with glue and alcohol wipe incl. screws and nut, or as a single shoe with screws and nuts. Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Glue one shoe RALLY
The RALLY glue-on horseshoe is an innovative, flexible hoof protection that has been patented over 10 years of development in collaboration with engineers and hoof care professionals. It combines high-quality plastic with a well-thought-out design that allows your horse to move naturally.Why choose the RALLY glue-on horseshoe?Flexibility and lightness: The hoof protection consists of a hard plastic sole element and soft plastic sidewalls that are gently attached to the hoof wall.Optimal grip: The large-area attachment evenly absorbs thrust, centrifugal, and shear forces, allowing your horse to walk barefoot.Versatile use: The RALLY is suitable for various terrains and applications – from daily rides to intense activities.Advantages of the RALLY glue-on horseshoe:Custom adhesive choice: You can choose between acrylate adhesive or PU adhesive. Acrylate adhesive is particularly reusable as it flows through the holes in the shoe and forms “mushroom heads” that securely hold the shoe.Grip and stability: The enlarged tread sole provides better traction and increased safety on all surfaces.Durable and robust: Thanks to its high abrasion resistance, the glue-on horseshoe is highly durable and lasts even under heavy use.Why choose Hoofstar RALLY for your horse?Promotes blood circulation: The flexible plastic of the RALLY ensures better blood flow in the hoof while walking.Shock absorption: The glue-on horseshoe acts as a shock absorber, protecting your horse’s tendons, joints, and ligaments.No nail holes: Unlike traditional nail-on horseshoes, the hooves remain undamaged.Lightweight and comfortable: The RALLY is significantly lighter than traditional horseshoes, providing additional comfort.Reduced injury risk: Particularly in herd settings, the RALLY reduces the risk of injuries since no nails are used.Size chart for the RALLY glue-on horseshoeSelect the appropriate size (Size 9 to 15) based on your horse’s hoof width. Measure the hoof at its widest point – not its length. If unsure, choose the smaller size. The hoof width can be adjusted using the supplied spacers.SizeHoof WidthMax. Hoof Length98 - 9 cm10.2 cm109 - 10 cm11.0 cm1110 - 11 cm12.1 cm1211 - 12 cm13.0 cm1312 - 13 cm14.1 cm1413 - 14 cm15.0 cm1514 - 15 cm15.9 cmImportant note: If your horse’s hooves exceed the maximum hoof length, the RALLY glue-on horseshoe is too short.How to properly attach the RALLY glue-on horseshoeThe RALLY glue-on horseshoe can be applied by horse owners themselves or by hoof care professionals/farriers. Ideally, the glue-on horseshoe should be applied after hoof trimming, but no later than a week afterward. Detailed instructions and additional materials can be found on our instruction page.For first-time users, we recommend our 👉 Starter Kit, which includes everything needed to apply the RALLY glue-on horseshoe.Product safety information:Horse hoof boot (pair), glue-on horseshoe, RallyManufacturer and responsible party: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
glue-u SHUBOND (Acrylate adhesive)
The Shubond acrylic adhesive from Glue-U is a high-quality 2-component acrylic-based adhesive that has been specially developed for bonding the Rally adhesive shoe from Hoofstar. With its longer working time and reliable curing, it is particularly easy to use and ideal for precise work. The 150 ml coaxial cartridge can be used with the Shubond dispensing gun or standard universal dispensing guns (silicone guns) if an adapter (available separately) is used. Advantages of the Shubond acrylic adhesive relaxed working: With an open working time of 90 to 120 seconds, the fitting can be glued on conveniently and precisely - ideal for users who need a little more time. Versatile in use: In addition to horseshoes such as the Hoofstar Rally, steel and aluminium can also be bonded. Reliable performance: Can be loaded quickly after 7-8 minutes, even at low temperatures. Technical details Type: 2-component acrylate-based adhesive Working time (open time): 90-120 seconds Colour: Beige Content: 150 ml Mixing tips: Available separately and required for application. Processing instructions Preheating in winter: The adhesive should be heated to 30 °C before use (not above 40 °C). The manufacturer does not guarantee optimum curing below 15 °C. No preheating in summer: Preheating is not necessary at higher temperatures.Comparison with PU adhesives Comparison with PU adhesives In contrast to fast-curing PU adhesives such as Shufix, Shubond acrylic adhesive offers a longer processing time. This enables a relaxed and more precise application of the adhesive fitting, without time pressure. Product safety information: Acrylic adhesive in 150ml coaxial cartridge, Shubond Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/
Content: 0.15 Liter (€276.67 / 1 Liter)
glue-u SHUFIX (PU-Adhesive)
The Shufix adhesive from Glue-U is a high-performance 2-component polyurethane adhesive (PU adhesive), specially developed for attaching the Rally adhesive horseshoe from Hoofstar. With its fast curing time and strong adhesion, it is the ideal solution for professional hoof protection applications. The 250 ml cartridge (coaxial cartridge) is compatible with common standard silicone presses or the PU squeeze gun from Hoofstar. Advantages of the Shufix adhesive Fast curing: The adhesive cures within 30 to 60 seconds and can be worked on after approx. 5 minutes. High adhesive strength: The PU base ensures a strong and durable bond between hoof and shoe. Easy to use: Compatible with standard and special spray guns for precise application. Professional quality: Specially developed for the requirements of equestrian sports. Technical details Type: 2-component PU-based adhesive Curing time: 30-60 seconds Can be processed after: approx. 5 minutes Colour: White Content: 250 ml Mixing tips: Available separately and required for correct application. Note: The appropriate mixing tips are sold separately and must be used for optimal mixing and performance. Product safety information: Squeeze gun for Koxial cartridges 250 ml, PU adhesive squeeze gun Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/
Content: 0.25 Liter (€164.00 / 1 Liter)
Mixing tips (10 pack)
Pack of 10 mixing tips suitable for the following glues and hoof pads: SHUBOND (acrylic glue) 150 ml Shufix (PU glue) 250 ml Hoof pads Shupack soft and medium Shugard hoof pad hard Specially developed for use with adhesive fittings, these mixing nozzles enable precise and homogeneous mixing of the adhesive, which ensures optimum adhesion and longevity of the adhesive fitting. Key facts Hoofstar mixing tips: Precision mixing: guarantees an even mixture of the adhesive components, essential for excellent bonding results and the avoidance of air bubbles. Easy to use: Easy screw-on and hassle-free application allow for a quick and clean bonding process. Disposable design: Our mixing tips are designed for single use, which avoids cross-contamination and ensures optimum performance every time. Our mixing tips enable precise and safe application of hoof adhesives, whether for routine care or special corrective measures on the hoof. Information on product safety: Mixing nozzles for use with hoof glue, mixing nozzles (pack of 10) Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/
Dispensing gun for Shufix and Shupack
This universal squeeze gun is the perfect tool for precise squeezing of Shufix and Shupack adhesives. Developed for all 250 ml Koxial cartridges, it ensures even dosing and allows you to apply the adhesive or hoof padding effortlessly - whether you are repairing or gluing hoof boots and horseshoes. With a suitable adapter, the squeeze gun is also suitable for 150 ml Shubond cartridges, making it even more versatile. Thanks to its robust design and ergonomic handling, the gun sits securely in the hand and guarantees a long service life, even with regular use. Ideal for professionals and ambitious horse owners who prioritise quality and precision. Advantages: Compatible with all 250 ml Koxial cartridges (Shufix & Shupack) Can also be used for 150 ml Shubond cartridges with adapter Ergonomic design for comfortable handling Robust construction for professional use Precise and even adhesive dosing Make your work easier and achieve excellent results with the universal squeeze gun - indispensable for every hoof care set! Information on product safety: Dispensing gun for adhesive Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/
Shubond Dispensing Gun
Professional dispensing gun for hoof glue - ideal for 150ml Shubond glue cartridges Experience maximum efficiency and precision with our specially developed squeeze gun, which is perfect for use with hoof adhesives and hoof pads. Our gun has been specifically designed for 150ml Shubond glue cartridges and, unlike universal squeeze guns, does not require an additional adapter. This saves you time and improves handling during application. It can also be used for Shufix glue and hoof pads. Superior functions for optimum performance: Powerful application: Thanks to a large force ratio of 25:1, the adhesive can be squeezed out easily and with minimal effort, which simplifies handling and enables fatigue-free work. Ideal for coaxial cartridges: The gun is specially designed for 2-component adhesives with a mixing ratio of 10:1, making it a must-have for any professional application. Robust construction: Manufactured from high-quality aluminium, the gun's half-shell offers lasting reliability and durability, even with regular intensive use. Adapter-free technology: The innovative split plunger of this squeeze gun enables direct and precise application of hoof glue without the complications of an adapter. Optimise your glue-on horseshoes: This dispensing gun is an indispensable tool for anyone who wants to professionally apply Hoofstar adhesive fittings. It ensures an even and controlled distribution of the adhesive, which significantly improves the durability and effectiveness of the adhesive shoeing. The easy handling and the special adaptation to the Shubond glue cartridges guarantee excellent results every time. Information on product safety: Dispensing gun for adhesive Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/
Hufpolster glue-u SHUPACK
Glue-u Shupack (formerly Shufill Cushion) is a resilient hoof cushion in the hardness grades Soft (Shore hardness A30) and Medium (Shore hardness A50). With a capacity of 250 ml, the cartridges fit into any standard silicone applicator gun. The hoof pad provides support, protection and cushioning for the hoof sole. In the case of laminitis, the pad can be filled up to the ground. The use of a net (mesh net) is not essential, but recommended. This is also available in our shop. Shufill needs about 2 minutes to cure, the initial curing time (open time) is 35 seconds. The glue-u Shufill pad can be used with all Hoofstar glue fittings. Mixing tips must be ordered for separately (not included). The pads can be used with standard silicone dispense gun or in the Shubond dispensing gun. Shufill Cushion Soft (A30): Soft, shock-absorbing filling material. Remains soft, even in cold weather Self-adhesive Fill to the floor with mesh or use with Shupads 35 seconds curing time Becomes warm when cured Shufill Cushion Medium (A50): Medium strength, shock absorbing filler material Remains stable during adhesive fitting, even in cold weather Self-adhesive Application with mesh or with shupads 35 seconds curing time Becomes warm during curing The hard pad with Shore hardness A60 can be found here under the name Shuguard. In winter, the Shuguard pad can be used especially as a snow grip. Information on product safety: Hoof pads for horse hooves, Shupack Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/
Content: 0.25 Liter (€156.00 / 1 Liter)
Shufill HOOF PACKING A25
This Glue-U kneading pad is very easy to use. Simply take equal amounts of component A and component B and knead evenly. Then shape it into the desired form. As the pad is silicone-based, it does not stick to the hoof by itself. For this reason, mesh (a grid) or shupads must be used to make the pad stick to the hoof. To do this, cut the mesh to fit the size of the hoof, apply the pad to the hoof, place the mesh on top and place the Hoofstar Rally on top, which is then glued in place. The 2 components provide a total of 1.3 kilos of padding to work with. As a result, this pad is significantly cheaper than a pad for lace-in. Key Facts: Soft padding Non-toxic and skin-friendly (does not irritate or cause allergic reactions) Cure time 4-5 minutes (warmed 2-3 minutes) Can be combined with any medical application Product safety information: Kneading pad for horse hooves, hoof pad made of two components, Hoof Packing A25 Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/
Mesh for shoe pads
Mesh is used to integrate a pad into an glue-on horseshoe. The mesh ensures that the pad remains on the hoof. Application: Cut mesh to the size of the glue-on shoe and put it in the glue-on shoe, then glue it on. After the glue-on shoe has cured, insert the pad. Mesh can be used for Glue-u Shufill, but also for other pads, for example from Luvex. Size: 0,5 x 0,2 m Information on product safety: Mesh Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/
Shupads / Buffer Soles / Shock Absorbers
Shupads are the basis for silicones and pads. The pads are supplied as a pack of 2 in the size of 15 x 15.5 cm and can be very easily cut to the correct hoof size with scissors or a nipper. The high quality urethane material ensures that the hoof mechanism is not restricted and keeps the pad in position. Experience shows that Glue-U Shupads are extra durable. Each Shupad is equipped with self-closing injection holes. This makes it easy to inject a liquid cushion into the shoe. The Shupads can also be used to create a floating toe by cutting out the toe and inserting it into the Hoofstar Rally. Key facts SHUPADS flat flex M Supplied in a pack of 2 Flat plate with 4 filling holes Information on product safety: Insoles for hoof boots and adhesive shoes, insert pads, shupads Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/
Spikes
Spikes for the Hoofstar Rally or Hoofstar Swift. We recommend 6 spikes per shoe / hoof. Sold in packs of 12. This means that 24 spikes (2 sets) are needed for a full shoeing. To turn the spikes into the shoe, a spike key is needed. This can be ordered in the "set with spike key". The spike key only needs to be purchased once and can be used again and again. The spike key is inserted into a cordless drill like a bit. It keeps the spikes and screws them in. The pre-drilled holes in the Hoofstar Rally can be used. If more spikes are used than there are holes, they must be pre-drilled approx. 3 mm. Only then can the spikes be inserted. Size of the spikes: 7.9 x 9.8 mm Retractable area: 7.9 mm Overhanging area: 1.9 mm Information on product safety: Widia pins for horse shoes and adhesive shoeing, screw spikes type 1100 Manufacturer and responsible person: Bestgrip S.r.l. Via Ca' dell'Agro 100, 24024 Gandino (Bg) Italy, info@best-grip.com
Mini stretch foil
You need mini stretch foil so that you can glue the hoof shoe Rally accurately to the hoof. The foil allows the hoof shoes to be glued to the ground with the hoof down. In contrast to commercially available foil from the DIY store or even plastic film, our mini stretch foil is much thicker and more tear-resistant with 35my. This is the only way to build up sufficient tension when wrapping the film (all other films tear beforehand). The film can be removed without leaving any residue, as it only sticks to itself. Are you buying it for the first time? Then buy the set with handle for easier handling. By the way, both are already included in our starter set. Scope of delivery: 1 roll Key-Facts Mini stretch film, transparent with protruding core Thickness of the film: 35 my Length of the roll: 150 m Width of the film: 100 mm Inner core diameter: 38 mm Core protrusion 1: 40 mm Tube protrusion 2: 5mm Information on product safety: Film, LDPE stretch film, mini stretch film Manufacturer and responsible person: dm-folien GmbH, Markwiesenstraße 33, 72770 Reutlingen, produktsicherheit@dm-folien.de, https://www.dm-folien.com
Stretch foil dispenser incl. foil
The Hoofstar Mini Stretch Foil is particularly stable and tear-resistant with a thickness of 35my and therefore ideal for fixing the Hoofstar hoof shoes to the hoof. The protruding core and the ergonomic handle make it comfortable to hold and unwind. We deliver the foil in a set together with the handle, which makes it especially easy to use. Further rolls of mini stretch foil (without handle) are also available in our online shop. Why mini strech foil? You need mini stretch foil so that you can glue the hoof shoe Rally accurately to the hoof. The foil allows the hoof shoes to be glued to the ground with the hoof down. In contrast to commercially available foil from the DIY store or even plastic film, our mini stretch foil is much thicker and more tear-resistant with 35my. This is the only way to build up sufficient tension when wrapping the film (all other films tear beforehand). The film can be removed without leaving any residue, as it only sticks to itself. Are you buying it for the first time? Then buy the set with handle for easier handling. By the way, both are already included in our starter set. Scope of delivery: 1 roll Key-Facts Mini stretch film, transparent with protruding core Thickness of the film: 35 my Length of the roll: 150 m Width of the film: 100 mm Inner core diameter: 38 mm Core protrusion 1: 40 mm Tube protrusion 2: 5mm Information on product safety: Film with stretch film dispenser, LDPE stretch film with handle, mini stretch film with stretch film dispenser handle Manufacturer and responsible person: dm-folien GmbH, Markwiesenstraße 33, 72770 Reutlingen, produktsicherheit@dm-folien.de, https://www.dm-folien.com
Diamond rasp handle
Rasp handle made of strong polyurethane and hardwood, suitable for Heller Excel and Legend as well as Mercury and many other rasps.The ergonomic, lightweight design provides a comfortable grip and little fatigue. A double nut ensures secure attachment, but still makes the handle easy to attach to the rasp.
Werkman Black Blade left
The Werkman Short Drop Left Hoof Knife is a perfectly shaped tool for professionals and self-sharpeners (sharpened on the left side for left-handers or for working on the left side).The Werkman Drop Blade hoof knife is of very high quality and, thanks to its weight, sits well and balanced in the hand, enabling fatigue-free working. Handle: length 14.7 cm, width 3.4 cm, gauge: 2.1cm Blade: length 7.1 cm, width 1.3 cm, gauge: 2.5mmInformation on product safety:Hoof knife, short drop leftManufacturer and responsible person:Werkman Hoofcare, Borkumweg 10, 9979 XH Eemshaven, Netherlands, info@werkmanhoofcare.com
Werkman Black Blade left
The Werkman Renet Black Blade is a perfectly shaped tool for professionals (for left-handers).The combination of the sharp black blade and the red wooden handle ensures that working on the horse is pleasant and easy. Available as right- and left-handed knife as well as loop. Handle: length 14.7 cm, width 3.4 cm, gauge: 2.1cm Blade: length 7.1 cm, width 1.3 cm, gauge: 2.5mmInformation on product safety:Hoof knife, Black Blade leftManufacturer and responsible person:Werkman Hoofcare, Borkumweg 10, 9979 XH Eemshaven, Netherlands, info@werkmanhoofcare.com
Werkman Black Blade left
The Werkman Renet Black Blade is a perfectly shaped tool for professionals (for left-handers).The combination of the sharp black blade and the red wooden handle ensures that working on the horse is pleasant and easy. Available as right- and left-handed knife as well as loop. Handle: length 14.7 cm, width 3.4 cm, gauge: 2.1cm Blade: length 7.1 cm, width 1.3 cm, gauge: 2.5mmInformation on product safety:Hoof knife, Black blade leftManufacturer and responsible person:Werkman Hoofcare, Borkumweg 10, 9979 XH Eemshaven, Netherlands, info@werkmanhoofcare.com
Swift PRO Pastern Strap
The Swift PRO bunion strap is the perfect addition to your Swift PRO hoof boot from Hoofstar. In the colour blue, it not only offers functionality, but also a sporty look.Easy to useThe bunion strap can be easily threaded into the gaiter from behind - no tools required! If necessary, it can be shortened to the desired length with scissors. Make sure that at least 3 holes remain at the end of the strap so that it can be securely fastened.Perfect fitThe bunion strap should always be closed as tightly as possible. It ensures that the hoof sits perfectly in the shoe and is pushed forwards.Size overviewThe Swift PRO bunion strap is available in three sizes to match the respective hoof boot sizes:Long: For sizes 128 and 134Medium: For sizes 116 and 122Short: For sizes 110 and 104Find the right size for your horse and experience perfect support!Product safety information:Bunion strap in blue for the Swift PRO hoof boot Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Replacement bar for Hoofstar RALLY
You want to use our glue-on shoe Rally from Hoofstar a second or third time, but you don't have the right bars at hand? Then you can order replacement bars here.The bars can be ordered individually. So if you need bars for a whole pair of the adhesive shoe, you have to order two pieces.Information on product safety:Replacement bar for the hoof boot Rally, spare part for the adhesive shoe RallyManufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Pink accessories for Swift PRO
Make your Swift PRO hoof boot even more exciting with our new pink accessory set! We are proud to present the toe cap and bunion strap in a fresh, vibrant pink colour that not only looks stylish but also offers maximum functionality.Why should you switch to pink?Easy to replace: You can change the toe cap within minutes using an Allen key. The bunion strap is only plugged in. High-quality materials: The toe cap and bunion strap are made of hard-wearing material that can withstand the demands of the terrain. Robust and durable for a comfortable riding experience.A fresh look: give your horse's hoof boots a new, exciting touch. The bright pink colour not only catches the eye, but also adds a certain elegance.Visibility: With the pink upgrade, the hoof boots are much more visible. If they get lost in the pasture, it's easy to find them again.Give your horse a personal touch and equip his Swift PRO hoof boots with our pink accessories. Order today and experience a unique combination of functionality and style!Important note: Please note that the colour may vary slightly due to screen settings.Price per shoe (set of 2 consisting of a bunion strap and a toe cap).Information on product safety:Accessories for adhesive horseshoe Rally, toe cap and bunion strap in pink Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Repair Kit Swift PRO
It can happen from time to time that screws on your Swift PRO hoof boot come loose or get lost. No problem - you can easily replace them with our practical repair kit! This set is already included when you order the Swift PRO.Contents and useThe repair kit contains everything you need:Threadlocker (blue liquid):Use the screw lock for all screws that should not be loosened, e.g. the fasteners (also known as button rivets) on the gaiter and on the side of the shoe.Screws on the toe cap:You don't need threadlocker for these screws. You can easily loosen and refasten them with the two Allen keys supplied.With this set, you have everything you need to get your hoof boot ready for use again quickly and reliably.Information on product safety:Replacement screw set for the Swift PRO hoof boot Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Spare screws for fixing the ball mat
Replacement screw for attaching the bunion strap to the shoe. The replacement screw consists of a slotted pan-head screw and a nut. The same screw is used for all Swift sizes.Please note: If you have lost this screw, you will need threadlocker to secure the screw. This is a gel that is dripped into the thread of the screw so that it does not open by itself due to the movement of the horse. You can buy threadlocker in DIY stores.Information on product safety:Screws for the Swift PRO hoof boot for fastening the bale band, screwsManufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Replacement screw for ankle strap (gaiter)
This replacement screw is specially designed for attaching the fetlock strap (gaiter) to the Swift PRO hoof boot. The set consists of: one countersunk screw, one washer and a nut. Note on use If you have lost this screw, please remember to use threadlocker. This prevents the screw from loosening by itself due to the horse's movements. The screw lock is a special gel that is dripped into the thread of the screw. You can easily buy it from a DIY store. With the right locking device, your hoof boot will remain reliably ready for use! Information on product safety: Replacement screw set for the Swift PRO hoof boot for the fetlock strap consists of countersunk head screw, washer, nut Manufacturer and person responsible: Hoofstar, Vladimir Joffe, Griemstieg 5, 22885 Barsbüttel, Germany, www.hoofstar.com
Replacement screw for toe cap (gaiter)
This replacement screw is suitable for the toe cap of all sizes of Hoofstar Swift hoof boots. The set containsone pan head screwand the corresponding nut.Easy to useThe screw can be easily loosened and re-fastened with an Allen key. This keeps your hoof boot reliably and securely in position.An indispensable spare part if a screw is lost or needs to be replaced.Information on product safety:Replacement screw set for the Swift PRO hoof boot Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Adapter for 150ml Shubond cartridges
Adapter for the 150ml Shubond cartridges if they are to be squeezed out in a universal squeezing gun (silicone press). When using the squeeze gun from the starter set (Shubond squeeze gun), no adapter is necessary. Information on product safety: Adapter for a dispensing gun for use with Shubond adhesive, adapter Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/
Hi and welcome to the Hoofstar Online Shop!
Nice to have you here. At Hoofstar, everything revolves around glue-on hoof protection, glue-on shoes, and the right accessories—hoof protection that stays on the hoof, without nails, without noise, and without a big fuss. We’re based in North Frisia (Högel), develop our products right here, and ship directly from the North to your door.
Glue-on instead of nailed-on—simply more relaxed for many horses
A good glue-on system can be a really practical solution: for horses with sensitive hooves, during rehab phases, for everyday use on changing surfaces—or if you simply want hoof protection that stays reliably in place while not unnecessarily restricting the hoof’s natural movement.
Many customers choose glue-on shoes and glue-on hoof protection because they want an alternative to traditional iron shoes—whether due to hoof quality, crumbly hoof walls, nails no longer holding well, or because the hustle, noises, and holding the leg up for a long time is simply stressful for their horse.
Ready to use: unpack, fit, glue
What matters to us: our glue-on products are ready to use. You don’t need to trim things down, weld tabs on, or build anything before it fits. The system is designed to be ready to go right away—depending on the model, the size is set or selected accordingly, and then you can glue. That saves time, nerves, and simply makes things a lot more pleasant at the yard.
What Hoofstar stands for
Hoofstar was founded by Vladimir, who used his technical know-how to develop a glue-on system that works in real life: fast, clean, reliable. And that’s exactly how we approach things day to day—solutions that hoof care professionals can actually use, instead of complicated projects at the yard.
That’s why in our shop you’ll find not only glue-on hoof protection / glue-on shoes, but also everything that makes sense alongside it: hoof adhesive, tools for preparation, accessories for application, and products for repair and care—so you (or your hoof care professional) don’t have to improvise for ages.
What you’ll find in our shop
- Glue-on hoof protection & glue-on shoes for reliable hoof protection
- Adhesives (2-component adhesive / instant adhesive) matched to the system
- Accessories for preparation (e.g., roughening and cleaning)
- Repair & replacement solutions if something needs touching up
- Grip options like spikes / carbide pins (depending on use)
If you’re not sure what fits your horse or how to get started best: just drop us a message. We’re happy to help—straightforward in a northern way, but always friendly.