Product information "glue-u SHUBOND (Acrylate adhesive)"
Acrylic glue from Glue-U for gluing the adhesive fitting Rally. Available in 150ml cartridges in the colours black or beige. The matching squeeze gun is the Shufit squeeze gun.
The 2-component adhesive also fits into a universal squeeze gun (silicone squeezer) if an adapter (must be ordered separately) is used.
Glue-U Shufit bonds Hoofstar Rally as well as steel and aluminium.
Processing time
The processing time is 90 to 120 seconds (open time). The glue is ready for use after 7-8 minutes (even when cold).
In detail, this means that you have about 2 minutes for the adhesive to harden in the mixing nozzle. This is relatively slow compared to PU glue (see glue-U Shufix). For this reason, Hoofstar glue-on shoeing with acrylic glue is much more relaxed.
Temperature and humidity can affect the performance of this product.
Preheat shufit
The recommended processing temperature of the adhesive is 30 degrees! In winter, it is essential to preheat the adhesive (do not heat it above 50 degrees)! If glue-U Shufit has a temperature below 15 degrees, the manufacturer no longer guarantees that the 2-component adhesive will set. In the summer months, especially in the hot period, it is not necessary to preheat the acrylic adhesive.
Glue-U Shufit Details
-
- 2-component adhesive
- Cures in 2 minutes
- Colours: black and beige
- Content: 150ml