Shufill HOOF PACKING A25

The Shubond acrylic adhesive from Glue-U is a high-quality 2-component acrylic-based adhesive that has been specially developed for bonding the Rally adhesive shoe from Hoofstar. With its longer working time and reliable curing, it is particularly easy to use and ideal for precise work. The 150 ml coaxial cartridge can be used with the Shubond dispensing gun or standard universal dispensing guns (silicone guns) if an adapter (available separately) is used. Advantages of the Shubond acrylic adhesive relaxed working: With an open working time of 90 to 120 seconds, the fitting can be glued on conveniently and precisely - ideal for users who need a little more time. Versatile in use: In addition to horseshoes such as the Hoofstar Rally, steel and aluminium can also be bonded. Reliable performance: Can be loaded quickly after 7-8 minutes, even at low temperatures.   Technical details Type: 2-component acrylate-based adhesive Working time (open time): 90-120 seconds Colour: Beige Content: 150 ml Mixing tips: Available separately and required for application.   Processing instructions Preheating in winter: The adhesive should be heated to 30 °C before use (not above 40 °C). The manufacturer does not guarantee optimum curing below 15 °C. No preheating in summer: Preheating is not necessary at higher temperatures.Comparison with PU adhesives Comparison with PU adhesives In contrast to fast-curing PU adhesives such as Shufix, Shubond acrylic adhesive offers a longer processing time. This enables a relaxed and more precise application of the adhesive fitting, without time pressure.   Product safety information: Acrylic adhesive in 150ml coaxial cartridge, Shubond Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/

Mesh is used to integrate a pad into an glue-on horseshoe. The mesh ensures that the pad remains on the hoof. Application: Cut mesh to the size of the glue-on shoe and put it in the glue-on shoe, then glue it on. After the glue-on shoe has cured, insert the pad.   Mesh can be used for Glue-u Shufill, but also for other pads, for example from Luvex.   Size: 0,5 x 0,2 m   Information on product safety: Mesh Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/

The RALLY glue-on horseshoe is an innovative, flexible hoof protection that has been patented over 10 years of development in collaboration with engineers and hoof care professionals. It combines high-quality plastic with a well-thought-out design that allows your horse to move naturally.Why choose the RALLY glue-on horseshoe?Flexibility and lightness: The hoof protection consists of a hard plastic sole element and soft plastic sidewalls that are gently attached to the hoof wall.Optimal grip: The large-area attachment evenly absorbs thrust, centrifugal, and shear forces, allowing your horse to walk barefoot.Versatile use: The RALLY is suitable for various terrains and applications – from daily rides to intense activities.Advantages of the RALLY glue-on horseshoe:Custom adhesive choice: You can choose between acrylate adhesive or PU adhesive. Acrylate adhesive is particularly reusable as it flows through the holes in the shoe and forms “mushroom heads” that securely hold the shoe.Grip and stability: The enlarged tread sole provides better traction and increased safety on all surfaces.Durable and robust: Thanks to its high abrasion resistance, the glue-on horseshoe is highly durable and lasts even under heavy use.Why choose Hoofstar RALLY for your horse?Promotes blood circulation: The flexible plastic of the RALLY ensures better blood flow in the hoof while walking.Shock absorption: The glue-on horseshoe acts as a shock absorber, protecting your horse’s tendons, joints, and ligaments.No nail holes: Unlike traditional nail-on horseshoes, the hooves remain undamaged.Lightweight and comfortable: The RALLY is significantly lighter than traditional horseshoes, providing additional comfort.Reduced injury risk: Particularly in herd settings, the RALLY reduces the risk of injuries since no nails are used.Size chart for the RALLY glue-on horseshoeSelect the appropriate size (Size 9 to 15) based on your horse’s hoof width. Measure the hoof at its widest point – not its length. If unsure, choose the smaller size. The hoof width can be adjusted using the supplied spacers.SizeHoof WidthMax. Hoof Length98 - 9 cm10.2 cm109 - 10 cm11.0 cm1110 - 11 cm12.1 cm1211 - 12 cm13.0 cm1312 - 13 cm14.1 cm1413 - 14 cm15.0 cm1514 - 15 cm15.9 cmImportant note: If your horse’s hooves exceed the maximum hoof length, the RALLY glue-on horseshoe is too short.How to properly attach the RALLY glue-on horseshoeThe RALLY glue-on horseshoe can be applied by horse owners themselves or by hoof care professionals/farriers. Ideally, the glue-on horseshoe should be applied after hoof trimming, but no later than a week afterward. Detailed instructions and additional materials can be found on our instruction page.For first-time users, we recommend our 👉 Starter Kit, which includes everything needed to apply the RALLY glue-on horseshoe.Product safety information:Horse hoof boot (pair), glue-on horseshoe, RallyManufacturer and responsible party: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com

The Rally Starter Set is ideal for anyone who wants to try the Hoofstar Glue-On Horseshoe for the first time. It contains everything you need for the initial application!💡 Tip: For the first application, we recommend having the glue-on horseshoe applied by a professional hoof care specialist or farrier. This way, you can learn the correct techniques and avoid mistakes.📦 Contents of the Starter Set1 or 2 pairs of Hoofstar Rally Glue-On Horseshoes (including bridges, in your chosen size)1x or 2x 150 ml Shubond Hoof Glue (Acrylic adhesive) – sufficient for 3 or 6 shoes1x Shubond Dispensing Gun for 150 ml cartridges5x or 10x Mixing Nozzles – enough for multiple attempts, even if small mistakes occur1x Mini stretch film with dispenser📏 Which size is right?Measure the hoof width at the widest point (not the length!).💡 Tip: If you are between two sizes, choose the smaller one – the included bridges allow for flexibility.🔍 Best time to measure: Right after hoof trimming.SizeHoof WidthMax. Hoof Length98 - 9 cm10.2 cm109 - 10 cm11.0 cm1110 - 11 cm12.1 cm1211 - 12 cm13.0 cm1312 - 13 cm14.1 cm1413 - 14 cm15.0 cm1514 - 15 cm15.9 cm💡 Note: If the hoof length exceeds the maximum value, the Rally Glue-On Horseshoe is too short for your horse.🔥 Why choose the Hoofstar Rally Glue-On Horseshoe?✔ Flexible adhesive choice: Acrylic adhesive (included) or PU adhesive usable✔ Reusable: Acrylic adhesive allows multiple uses of the horseshoe✔ Extra stability: Enlarged sole profile for better grip and abrasion resistance✔ Easy application: Perforated side tabs show adhesive distribution✔ Durable: Highly abrasion-resistant sole for long-term use🛠 How to apply the Hoofstar Rally📖 Detailed instructions & video tutorials: Click here 📝 Important tips to avoid mistakes in our blog: Why does the glue-on horseshoe come off?💡 Recommendation: Read the blog before your first application – it helps avoid common mistakes!Product Safety Information:Hoofstar Rally Starter Set including 1 pair of horseshoes, adhesive, dispensing gun, mixing nozzles, film, and film holderManufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com