01 / CHOOSE
Find the right size
Measure the hoof width and length, then use the size guide to find the right RUNA size. Measure each hoof separately.
Open the size guideHelp & Guides
Using RUNA, step by step
Find the right size, prepare the hoof and glue on RUNA. Here you’ll find the essential guides and answers for choosing, fitting and reusing your RUNA.
Find the right size
Clear fitting instructions
Guidance on reuse
What would you like to do?
Choose the guide you need. Each one takes you through the relevant steps.
02 / FIT
Fit RUNA
Adjust the size, carefully prepare the bonding surface and press each tab into place calmly and evenly.
Follow the fitting guide03 / REUSE
Remove & repair
Learn how to remove RUNA carefully, clean it and check the inside surface before using it again.
View the guideQuick answers
For more detail, see the guides and the RUNA FAQs.
Where should I start?
Start with the size guide. Measure the hoof width and length carefully, and measure each hoof separately. Then follow the fitting guide.
What if the hoof measurement is exactly on the boundary between two sizes?
Try both options on the hoof: set the larger RUNA as small as possible, or the smaller size as large as possible. Make sure the heels sit fully inside the shoe and that the fit is secure.
How long should I press each adhesive tab?
Aim for 10 seconds of even pressure per tab; press for at least 5 seconds.
Still unsure about the size or application?
For help choosing a size or advice about RUNA, contact Hoofstar via WhatsApp or the contact form.