Skip to main content Skip to search Skip to main navigation
Produced in Germany
All from a single source
Perfectly tailored to your horse
Purchase comfortable on account
WhatsApp +49 (0) 15 15 58 40 381

Welche RUNA-Größe passt zu deinem Pferd?

Finde die passende Größe mit unserem RUNA-Größenfinder. Halte dafür die Hufmaße deines Pferdes bereit.

RUNA-Größe finden

Untamed energy, dynamic drive, explosive power – concentrated in an elegant design that can be glued on in minutes. The RUNA “Fire Horse” Edition celebrates the Chinese Year of the Horse with a bold look: one side red, one side orange. Visible. Full of character. 100% RUNA glue-on horseshoe.

Why RUNA “Fire Horse”?

  • Power at the hoof: The red/orange duo stands for forward drive and presence – perfect for training, trail rides, and competitions.
  • Elegance meets simplicity: RUNA arrives ready to use. In just a few minutes you adjust it – without tinkering, without tech stress, and without any crafts background.
  • Quick to glue: Apply super glue thinly, press each tab evenly for 5–10 sec. – done.
  • Secure hold: On degreased, dry, freshly roughened horn, the glue-on shoe holds reliably.
  • Made in Germany: Developed and produced in Nordfriesland – made locally, shipped directly.

Application in 4 steps (RUNA glue-on horseshoe)

  1. Adjust: Set the RUNA glue-on horseshoe to the hoof width and lock it in place (simple screw click system).
  2. Roughen: Carefully roughen the hoof wall with the fine side of the rasp (remove patina/dirt).
  3. Degrease: Clean with an alcohol wipe (included in the starter set) and let it evaporate briefly. After that, do not touch with bare hands.
  4. Glue: Apply super glue thinly to each tab, press 10 sec. per tab. Let it cure briefly – and you’re ready to go.

Good to know

  • Limited Edition: available only while supplies last.
  • Repairable: With the RUNA Repair Kit, the inner liner can be replaced if needed – remove/file off old glue residue beforehand.
  • Choosing the size: As usual with RUNA, choose based on hoof width.

Fire Horse size chart

Size Hoof width Max. hoof length
14 13.8 – 14.7 cm 14.5 cm
13 12.7 – 13.9 cm 14 cm
12 11.6 – 12.8 cm 13 cm
11 10.9 – 11.9 cm 12 cm
10 9.7 – 10.9 cm 10.9 – 11.1 cm

 

Between two sizes?

  • Wider at the heels (triangular)? → choose the smaller size and adjust it to the maximum width.
  • More round? → choose the larger size and adjust it as small as possible.

 

Product safety information

Glue-tab system RUNA Fire Horse, as a set with glue and alcohol wipe including screws and nut, or as a single shoe with screws and nuts.

Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com

Our comment on "RUNA Limited Edition “Fire Horse”"
Test

Hoofstar – Innovation Meets Practice

At Hoofstar, we combine technical development with what horses and people need in everyday life. We are based in North Frisia (Germany) and manufacture the RUNA glue-on horseshoe entirely ourselves: Every component and every production step is carried out locally – exclusively in North Frisia, Germany.

Our goal? To make hoof protection smarter. That is why we work closely with riders, hoof care professionals and veterinarians. Their feedback flows directly into our ongoing development – creating glue-on horseshoes that prove themselves in everyday use.

We rely on high-quality materials, well-thought-out design and streamlined production processes. The result: Durable, horse-friendly glue-on horseshoes that adapt perfectly to the hoof and are easy to use.

Hoofstar – Technology that feels like barefoot.

Product safety information
Information on the manufacturer (information obligations under the GPSR Product Safety Regulation)

Hoofstar, Vladimir Joffe
Mirebüll 3
25858 Högel
Germany

 www.hoofstar.com

 

RUNA adhesive tab system Fire Horse, set including adhesive and alcohol wipe, with screws and nuts, or as a single tab with screws and nuts

Details of the responsible person in the EU (information obligations under the GPSR Product Safety Regulation)

Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experience with our products with other customers.

At Hoofstar, every consumer review is checked for authenticity before it is published, ensuring that reviews only come from consumers who have actually purchased/used the products being reviewed.

The verification is done by manually checking the review against the order history of the merchandise management system to make a previous product purchase a necessary condition for publication.


Skip product gallery

Weitere RUNA Farben

Tip
Black RUNA glue-on horseshoe viewed from the front at an angle, with glue tabs and an open sole

Average rating of 4.56 out of 5 stars

Glue-on set RUNA

What is the Hoofstar Glue Tab System? No welding, no trimming, and no tools are needed for the RUNA glue-on shoe. You receive a ready-to-use hoof protection that just needs to be attached to the hoof with super glue. Thanks to the unique tap-to-fit mechanism, you can adjust the size to the millimeter – no complicated fitting required. Everything you need for the application comes in the starter kit – including glue, cleaning wipe, and illustrated instructions. Why RUNA? Quick and easy to apply: Each glue tab is attached within seconds while your horse stands comfortably. No tools required – the size is adjusted with a simple tap. Maximum comfort & freedom of movement The flexible plastic perfectly adapts to the hoof. Natural hoof movement remains unrestricted. Shoe without metal core. Reusable & sustainable: Reusable multiple times: Remove, trim the hooves, and glue them back on. Saves money and resources! How it works: Preparation: Roughen the hoof wall with a rasp and make sure it’s clean and dry. Adjustment: Set the correct size. Application: Secure to the hoof with just 10 tabs and super glue. Done – your horse can walk off right away! 🐎   Which version suits you? Starter Kit (1 pair of RUNA + glue + cleaning wipe + instructions) – €69 Single shoe – €32 Size Chart Size Hoof Width Max. Hoof Length 14 13.8 - 14.7 cm 14.5 cm 13 12.7 - 13.9 cm 14 cm 12 11.6 - 12.8 cm 13 cm 11 10.9 - 11.9 cm 12 cm 10 9.7 - 10.9 cm 10.9 - 11.1 cm   Is your horse between two sizes? Then take a close look at the hoof shape: Does the hoof widen toward the heel (triangular shape)? → Choose the smaller size and adjust it to the widest setting. Is the hoof more round? → Choose the larger size and adjust it to the smallest setting. Why Hoofstar? Hoofstar stands for innovative, sustainable, and horse-friendly hoof protection solutions. RUNA is the perfect alternative to traditional horseshoes or glue-on systems – lightweight, durable & reusable. 👉 Order your RUNA glue-on shoe now and take your hoof care to the next level!   Product safety information: RUNA Glue Tab System – set including glue and alcohol wipe, with screws and nuts, or as a single shoe with screws and nuts. Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com

Regular price: From €32.00
Skip product gallery

Performance & Anpassung

Spikes

Average rating of 5 out of 5 stars

Spikes

Tungsten Carbide Studs for Hoofstar Hoof Boots & Glue-On Horseshoes More grip with every step – even on challenging terrain. Our tungsten carbide studs (also known as spikes) are the ideal addition to Hoofstar RALLY, SWIFT and RUNA hoof boots and glue-on horseshoes. They provide extra traction on slippery or icy surfaces and can be easily installed using a cordless drill. Product Details Compatible with: Hoofstar RALLY, SWIFT & RUNA Pack size: 12 spikes (enough for 2 hooves) Recommended quantity: 6 spikes per hoof / 12 per pair / 24 for all four hooves Dimensions: 7.9 mm x 9.8 mm Installation depth: 7.9 mm Protrusion above the hoof boot: 1.9 mm Installation Instructions To screw in the spikes, you will need our spike installation tool, which fits into any cordless drill just like a standard bit. The tool holds the spikes securely and allows for quick, precise installation. You can purchase the spike installation tool as part of a set with 12 spikes – or separately if you already have the tungsten carbide studs. The tool is reusable and only needs to be purchased once.   Spike Installation Positions on Hoof Boots / Glue-On Horseshoes All Hoofstar glue-on horseshoes feature pre-drilled holes for the tungsten carbide studs: RUNA: Crescent-shaped arrangement (see last product image) If you would like to install additional spikes, extra holes (approx. 3 mm in diameter) can be pre-drilled.

Regular price: From €10.00
Discount
RUNA Repair Kit

Average rating of 4 out of 5 stars

Repair Kit RUNA

RUNA Repair Kit – Sticks like new When removing the RUNA, the soft black inner material may come off or stick to the hoof – not a big deal, but essential for the next application. That’s exactly what our Repair Kit is for: it helps you get your RUNA back in shape in no time. Perfect if you want to reuse your RUNA and count on a secure fit. What’s included? Inner pads for 1 RUNA glue-on shoe 4 cleaning wipes Tip: Superglue doesn't stick to itself – make sure to remove old glue residues first. Best done with our cleaning brush for the cordless drill, available in our shop. Mini File – Quick fix for glue areas If a flap comes loose while you're out and about, our handy mini file is just what you need. Use it to roughen the surface quickly and precisely – for secure re-gluing at the barn or on the go. Fits in any pocket, a must-have in every tack room. Available here: https://hoofstar.com/Feile-Miniraspel-runa

Sale price: €9.90 Regular price: €12.00 (17.5% saved) previously €9.90
Draufsicht auf einen Keile für den Klebebeschlag RUNA inkl. Schrauben
Hoofstar RUNA Wedge (1–5°)

Hoofstar RUNA Wedges – Inserts for the Glue-On Shoe (1–5°) The RUNA wedges are inserts for adjusting the angle of the Hoofstar RUNA glue-on shoe. They are sold individually per shoe. This means that, where professionally appropriate, different heights can be used on the left and right. The wedges are available in sizes 10 to 14 and in increments from 1° to 5°. They are compatible exclusively with the RUNA glue-on shoe. Important information on use Wedges alter hoof mechanics. Please always determine the diagnosis, the appropriate wedge angle and the duration of use together with a veterinarian and a professional hoof care specialist. Wedge height depending on RUNA size The degree value indicates the angle of the wedge. As the RUNA glue-on shoe varies in length depending on the size, the actual wedge height also differs. The table shows the height of the wedge in millimetres at the heel area. Example: With RUNA size 14, the 3° wedge is 9.8 mm high at the rear end. Size 1 degree 2 degrees 3 degrees 4 degrees 5 degrees 14 4.3 7 9.8 12.6 15.4 13 4 6.7 9.2 11.8 14.4 12 3.9 6.3 8.7 11 13.5 11 3.7 5.9 8.1 10.3 12.5 10 3.5 5.5 7.5 9.5 11.5   Use and benefits In consultation with a veterinarian and a professional hoof care specialist, wedges can help to fine-tune the hoof angle, temporarily relieve the heel area and adjust the breakover point. Possible uses may include temporary corrections of toe or heel position, rehabilitation or fine-tuning the balance of individual hooves. Installation and custom heights Installation video: In the video, we show you how to insert the wedges into the RUNA glue-on shoe. Do you need a custom wedge height? We can also produce custom sizes by prior arrangement. Please contact us at info@hoofstar.com. Advantages at a glance Designed to fit RUNA precisely and quick to insert Fine increments from 1° to 5° for professionally supervised adjustments Available individually – different heights can be used on the left and right Developed and manufactured in Germany

Regular price: From €7.90
Draufsicht auf den Schneegrip-Einsatz für den Hoofstar RUNA mit vier Senkkopfschrauben, vier passenden Buchsen/Unterlegscheiben und Inbusschlüssel; zur Montage vor dem Ankleben

Average rating of 5 out of 5 stars

Snow grip for RUNA

Snow Grip for Hoofstar RUNA Everything for secure footing in winter: The Snow Grip for Hoofstar RUNA is inserted into the RUNA glue-on shoe and reliably prevents snow and mud from “balling up” in the open sole. This keeps the tread surface clear – your horse has noticeably better traction in slush, on wet grass, and on frozen ground. Product Highlights No more snowballing – keeps the RUNA sole clear in winter Precision fit for Hoofstar RUNA – screws into the shoe, nothing wobbles or rubs Flush-mounted – the supplied screws are fully countersunk, no contact with the hoof Light & robust – unobtrusive in use, clearly effective Install before gluing – quick to fit, then glue on the RUNA as usual Important sizing note Please always order the matching size: For each RUNA shoe size you need the identical Snow Grip size. Available for all RUNA sizes (sizes 10 to 14). (Example: RUNA size 12 ⇒ Snow Grip size 12.) Assembly (before gluing) Check/set the RUNA size. Place the Snow Grip in the designated position and screw it firmly with the included screws – countersink all screws completely flush. Glue the RUNA to the hoof as usual. Notes Only suitable for Hoofstar RUNA. Please install before the gluing process. Scope of delivery 2× Snow Grip inserts (for one pair of RUNAs) 4× countersunk screws 4× press-in nuts 1× hex key Questions about sizing or installation? Get in touch – we’ll help you quickly. 🧡  

Content: 2 piece (€7.90 / 1 piece)

Regular price: From €15.80
Skip product gallery

RUNA Zubehör

Spikes

Average rating of 5 out of 5 stars

Spikes

Tungsten Carbide Studs for Hoofstar Hoof Boots & Glue-On Horseshoes More grip with every step – even on challenging terrain. Our tungsten carbide studs (also known as spikes) are the ideal addition to Hoofstar RALLY, SWIFT and RUNA hoof boots and glue-on horseshoes. They provide extra traction on slippery or icy surfaces and can be easily installed using a cordless drill. Product Details Compatible with: Hoofstar RALLY, SWIFT & RUNA Pack size: 12 spikes (enough for 2 hooves) Recommended quantity: 6 spikes per hoof / 12 per pair / 24 for all four hooves Dimensions: 7.9 mm x 9.8 mm Installation depth: 7.9 mm Protrusion above the hoof boot: 1.9 mm Installation Instructions To screw in the spikes, you will need our spike installation tool, which fits into any cordless drill just like a standard bit. The tool holds the spikes securely and allows for quick, precise installation. You can purchase the spike installation tool as part of a set with 12 spikes – or separately if you already have the tungsten carbide studs. The tool is reusable and only needs to be purchased once.   Spike Installation Positions on Hoof Boots / Glue-On Horseshoes All Hoofstar glue-on horseshoes feature pre-drilled holes for the tungsten carbide studs: RUNA: Crescent-shaped arrangement (see last product image) If you would like to install additional spikes, extra holes (approx. 3 mm in diameter) can be pre-drilled.

Regular price: From €10.00
Draufsicht auf einen Keile für den Klebebeschlag RUNA inkl. Schrauben
Hoofstar RUNA Wedge (1–5°)

Hoofstar RUNA Wedges – Inserts for the Glue-On Shoe (1–5°) The RUNA wedges are inserts for adjusting the angle of the Hoofstar RUNA glue-on shoe. They are sold individually per shoe. This means that, where professionally appropriate, different heights can be used on the left and right. The wedges are available in sizes 10 to 14 and in increments from 1° to 5°. They are compatible exclusively with the RUNA glue-on shoe. Important information on use Wedges alter hoof mechanics. Please always determine the diagnosis, the appropriate wedge angle and the duration of use together with a veterinarian and a professional hoof care specialist. Wedge height depending on RUNA size The degree value indicates the angle of the wedge. As the RUNA glue-on shoe varies in length depending on the size, the actual wedge height also differs. The table shows the height of the wedge in millimetres at the heel area. Example: With RUNA size 14, the 3° wedge is 9.8 mm high at the rear end. Size 1 degree 2 degrees 3 degrees 4 degrees 5 degrees 14 4.3 7 9.8 12.6 15.4 13 4 6.7 9.2 11.8 14.4 12 3.9 6.3 8.7 11 13.5 11 3.7 5.9 8.1 10.3 12.5 10 3.5 5.5 7.5 9.5 11.5   Use and benefits In consultation with a veterinarian and a professional hoof care specialist, wedges can help to fine-tune the hoof angle, temporarily relieve the heel area and adjust the breakover point. Possible uses may include temporary corrections of toe or heel position, rehabilitation or fine-tuning the balance of individual hooves. Installation and custom heights Installation video: In the video, we show you how to insert the wedges into the RUNA glue-on shoe. Do you need a custom wedge height? We can also produce custom sizes by prior arrangement. Please contact us at info@hoofstar.com. Advantages at a glance Designed to fit RUNA precisely and quick to insert Fine increments from 1° to 5° for professionally supervised adjustments Available individually – different heights can be used on the left and right Developed and manufactured in Germany

Regular price: From €7.90
RUNA Hufkleber für Klebebeschlag
Superglue RUNA

Hoofstar RUNA Special Super Glue – Flexible, Strong & Precise Our special super glue is specifically designed for securing Hoofstar RUNA adhesive horseshoes. Thanks to its elastic curing, it remains flexible and ensures a durable, high-strength bond – perfect for keeping your RUNA hoof boots securely in place. Why choose our RUNA glue? ✅ Optimal viscosity – Flows easily, distributes evenly, and allows for quick application.✅ High tensile strength – Withstands extreme stress for a secure and stable hold.✅ Precise application – Enables pinpoint accuracy for effortless and targeted bonding. Choose quality, durability, and maximum adhesion – for an adhesive horseshoe that truly lasts!   Storage and shelf life of the RUNA super glue: It is best to store your glue in the refrigerator. At 6 to 8 degrees Celsius, the glue has a shelf life of approximately 12 months. When stored at room temperature, it has a shelf life of approximately 6 months.      

Content: 0.02 Kilogramm (€345.00 / 1 Kilogramm)

Regular price: €6.90
File mini rasp RUNA
File mini rasp RUNA

Our square nail file with a coarse grit of 80/80 is the ideal tool for the precise processing and repair of RUNA adhesive fittings. Thanks to its stable shape and double-sided grit, it offers reliable and even sanding performance. Grit 80/80: Coarse-grained and ideal for quick, effective corrections. Square shape: Enables precise work even in hard-to-reach areas. Use this file to remove excess glue from the hoof and RUNA adhesive shoeing. You can then simply glue the shoe back on.  Size: 17.78 cm x 2.79 cm x 0.51 cm

Regular price: €2.00
Shupads / Buffer Soles / Shock Absorbers
Shupads / Buffer Soles / Shock Absorbers

Shupads are the basis for silicones and pads. The pads are supplied as a pack of 2 in the size of 15 x 15.5 cm and can be very easily cut to the correct hoof size with scissors or a nipper. The high quality urethane material ensures that the hoof mechanism is not restricted and keeps the pad in position. Experience shows that Glue-U Shupads are extra durable. Each Shupad is equipped with self-closing injection holes. This makes it easy to inject a liquid cushion into the shoe. The Shupads can also be used to create a floating toe by cutting out the toe and inserting it into the Hoofstar Rally. Key facts SHUPADS flat flex M Supplied in a pack of 2 Flat plate with 4 filling holes

Regular price: €11.50
Discount
RUNA Repair Kit

Average rating of 4 out of 5 stars

Repair Kit RUNA

RUNA Repair Kit – Sticks like new When removing the RUNA, the soft black inner material may come off or stick to the hoof – not a big deal, but essential for the next application. That’s exactly what our Repair Kit is for: it helps you get your RUNA back in shape in no time. Perfect if you want to reuse your RUNA and count on a secure fit. What’s included? Inner pads for 1 RUNA glue-on shoe 4 cleaning wipes Tip: Superglue doesn't stick to itself – make sure to remove old glue residues first. Best done with our cleaning brush for the cordless drill, available in our shop. Mini File – Quick fix for glue areas If a flap comes loose while you're out and about, our handy mini file is just what you need. Use it to roughen the surface quickly and precisely – for secure re-gluing at the barn or on the go. Fits in any pocket, a must-have in every tack room. Available here: https://hoofstar.com/Feile-Miniraspel-runa

Sale price: €9.90 Regular price: €12.00 (17.5% saved) previously €9.90
Metallbrüste für den Akkubohrer
Cleaning brush RUNA

You will need this cleaning brush if you need to use the RUNA adhesive fitting again and the black inner material has come loose or is uneven.  Key-Facts: Ø 38 mm diameter brush Weight 30 g Disc brush with 6 mm clamping shaft for clamping in the drill Speed, max. min-1: 4500 rpm Safety instructions: Please wear safety goggles, dust mask and work gloves during use.

Regular price: €6.00
2 Schrauben und 2 Muttern für den RUNA Klebebeschlag
Spare screw set

To ensure that your ‘Runa’ hoof boot is always securely fastened, we offer you a small replacement screw set with 2 screws and the matching nuts. Especially with intensive use, it can happen that a screw gets lost - with this set, you always have the right solution to hand. Perfect for private use This set is ideal for horse owners who use their ‘Runa’ hoof boot regularly and want to ensure that it always fits perfectly. Each application requires two screws and nuts per shoe, and if a screw is missing, you have a replacement quickly to hand with this set. This way, you can easily reattach your hoof boot and your horse remains protected. Compact and practical The set contains exactly two screws and the corresponding nuts - exactly the amount you need for one shoe. This means you have everything you need to firmly reattach your hoof boot. High quality and durable The nuts and bolts are made of durable, rustproof material that fulfils the requirements of the hoof boot sector. They are resistant to moisture, dirt and other influences that can occur during daily use and therefore offer a long service life. Summary With the replacement screw set for the ‘Runa’ hoof boot, you can be sure that you always have the right spare parts to hand. Two screws and nuts are all you need to reattach a hoof boot securely - ideal for end users.

Regular price: €2.80
glue-u Shucleaner zur Hufreinigung
glue-u Shu cleaner

Glue-U Shu Cleaner – Cleanliness that lasts When it comes to bonding, one thing matters most: a clean surface. The Glue-U Shu Cleaner makes it easy. Degrease the hoof, clean the surface – and you’ve got the perfect foundation for a strong, reliable adhesive bond. Especially with the RUNA adhesive shoe, degreasing is essential. Instead of struggling with alcohol wipes, simply use the spray: generously apply to the hoof, let it sit briefly, and blow dry – done. It couldn’t be more efficient. Acetone-free & residue-free: Evaporates cleanly without leaving traces. No wiping required: Unlike foam cleaners, no extra work needed. Quick application: Shake the can, spray – and the hoof is ready. For pros & practitioners: Saves time and ensures reliable results. Application:Shake can well before use. Generously spray the surface to be cleaned (hoof or adhesive area) from a distance of 20–30 cm. If necessary, work in with a brush. Spray again and allow to dry or blow dry. With Shu Cleaner, you’re on the safe side – because strong bonds always start with a clean surface.  

Content: 0.75 Liter (€13.20 / 1 Liter)

Regular price: €9.90
Draufsicht auf den Schneegrip-Einsatz für den Hoofstar RUNA mit vier Senkkopfschrauben, vier passenden Buchsen/Unterlegscheiben und Inbusschlüssel; zur Montage vor dem Ankleben

Average rating of 5 out of 5 stars

Snow grip for RUNA

Snow Grip for Hoofstar RUNA Everything for secure footing in winter: The Snow Grip for Hoofstar RUNA is inserted into the RUNA glue-on shoe and reliably prevents snow and mud from “balling up” in the open sole. This keeps the tread surface clear – your horse has noticeably better traction in slush, on wet grass, and on frozen ground. Product Highlights No more snowballing – keeps the RUNA sole clear in winter Precision fit for Hoofstar RUNA – screws into the shoe, nothing wobbles or rubs Flush-mounted – the supplied screws are fully countersunk, no contact with the hoof Light & robust – unobtrusive in use, clearly effective Install before gluing – quick to fit, then glue on the RUNA as usual Important sizing note Please always order the matching size: For each RUNA shoe size you need the identical Snow Grip size. Available for all RUNA sizes (sizes 10 to 14). (Example: RUNA size 12 ⇒ Snow Grip size 12.) Assembly (before gluing) Check/set the RUNA size. Place the Snow Grip in the designated position and screw it firmly with the included screws – countersink all screws completely flush. Glue the RUNA to the hoof as usual. Notes Only suitable for Hoofstar RUNA. Please install before the gluing process. Scope of delivery 2× Snow Grip inserts (for one pair of RUNAs) 4× countersunk screws 4× press-in nuts 1× hex key Questions about sizing or installation? Get in touch – we’ll help you quickly. 🧡  

Content: 2 piece (€7.90 / 1 piece)

Regular price: From €15.80