RUNA Arctic Berry
- in 5 min angebracht
- Kein Schweißen oder Zuscheiden
- Wiederverwendbar
RUNA Glue-On: fast, clean, strong
RUNA is the smart glue-on hoof protection that works instantly: No welding, no trimming, no special tools. Set the size, apply superglue – done.
Comfort without compromise: Adjust the size using the included bridges. Simply snap in and secure with the recessed screw. The starter kit includes everything: glue, cleaning wipe, screws, instructions.
Why RUNA?
✅ Ultra-fast application
- Each tab fixed in seconds – while your horse stands relaxed.
- No tinkering, no holding the hoof up.
✅ Mobility that adapts
- Flexible plastic hugs the hoof contour.
- Supports natural hoof mechanics – no metal core.
✅ Reusable & sustainable
- Re-glue after hoof care and keep riding.
- Saves money and resources.
Color: Arctic Berry
Monochrome. Clean. Bold. RUNA in Arctic Berry sets a calm, modern accent – pure look instead of color mix.
Application – step by step
- Preparation: Thoroughly roughen the hoof with the fine side of a hoof rasp. Do not degrease or oil. Keep the rasp clean. After roughening, do not touch with bare hands.
- Adjustment: Set the size, snap in the bridge, secure with the recessed screw.
- Bonding: Use superglue (RUNA) on clean, dry, fresh horn – done.
All steps in the video tutorial.
Variants & prices
- Starter kit (1 pair RUNA + glue + cleaning wipe + instructions) – €75
- Single shoe – €37
Size chart
| Size | Hoof width | Max. hoof length |
|---|---|---|
| 14 | 13.8–14.7 cm | 14.5 cm |
| 13 | 12.7–13.9 cm | 14 cm |
| 12 | 11.6–12.8 cm | 13 cm |
| 11 | 10.9–11.9 cm | 12 cm |
Between two sizes?
- Wider towards the heels (triangular)? → Choose the smaller size and set it to the maximum width.
- More round? → Choose the larger size and set it as small as possible.
Why Hoofstar?
Since 2016: simple, durable, well-thought-out hoof protection – Made in Germany. RUNA unites function, comfort, and sustainability.
Product safety information
Glue tabs system RUNA Arctic Berry, as a set with glue and alcohol wipe incl. screws and nut, or as a single shoe with screws and nuts.
Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
YouTube
Hoofstar – Innovation trifft Praxis
Bei Hoofstar stehen Technik und Innovation an erster Stelle – aber immer mit Blick auf das, was Pferd und Mensch wirklich brauchen. Als Hamburger Start-up entwickeln und produzieren wir unsere Klebebeschläge RUNA und RALLY komplett in Eigenregie.
Unser Anspruch? Hufschutz smarter machen. Deshalb arbeiten wir eng mit Reiterinnen, Hufbearbeiterinnen und Tierärzt*innen zusammen. Ihr Feedback fließt direkt in unsere Weiterentwicklung ein – für Klebebeschläge, die in der Praxis überzeugen.
Wir setzen auf hochwertige Materialien, clevere Designs und eine Produktion ohne unnötige Umwege. Das Ergebnis: Langlebige, pferdefreundliche Klebebeschläge, die sich perfekt an den Huf anpassen und einfach in der Anwendung sind.
Hoofstar – Technik, die sich anfühlt wie Barhuf.
Login
1 review
25 December 2025 10:29
Nur kurze Freude
Bewertung:
Leider hält der RUNA Klebebeschlag nicht sehr lange und dafür ist es mir zu teuer. Bereits nach einer Woche ist der Beschlag abgegangen. Die schwarze Klebeschicht war völlig zerrissen und ist teilweise am Huf, teilweise am Beschlag hängen geblieben. Insgesamt sehr enttäuschend – schade um das Geld. (Bestellnummer 25118916)
Size Adjustment
4 adjustment levels – from narrow to wide. The shoe comes preset to the middle position.
🔧 How to adjust:
- Remove the triangular bridge piece.
- Click the pins into the next slot for the desired width.
- Tip: Are the holes aligned in a straight line? Then you've found the right position – now click the shoe into place.
💡 Tip for wider settings:
- Click in and screw one side first.
- Then gently bend the shoe open and click in the second side.
Lock the Size & Degrease
Once you've adjusted the width of the glue-on shoe correctly, it needs to be fixed in place using the included nuts and screws.
- Insert the two included nuts into the aligned holes on the inside of the shoe. Press them in firmly so they stay securely in place.
- Insert the screws from the underside. Make sure to screw them in straight (!!), not at an angle – otherwise, they may strip and won’t hold properly.
- Use the Allen key to tighten the screws until they are completely recessed and flush with the sole of the shoe.
- Double-check that the shoe still fits perfectly after tightening.
Prepare the hoof: Use a hoof rasp to remove dirt and patina from the glue surface. Finish with the fine side to create a smooth surface.
Thoroughly clean the hoof with a lint-free alcohol wipe to remove any dirt, grease, or residue. A clean surface is essential for proper glue adhesion. Then clean the inside of the shoe with a lint-free alcohol wipe as well.
Gluing on the Runa
Once the size is locked in, you're ready to attach the glue-on shoe to the hoof.
- Put on the shoe: Slip the shoe onto the hoof and check the fit again to ensure it's sitting correctly and comfortably.
- Attach the glue tabs: Start with the rear tabs, gluing each one individually. Begin with the left rear tab, then the right rear, and work your way forward.
- Bend the tab outward so the inside is accessible for gluing.
- Apply 1–2 small drops of glue thinly (!) to the inside of the tab. Use as little glue as possible to ensure even spreading and strong adhesion (too much glue reduces bonding strength).
- Press the tab against the hoof and hold for 5 seconds with steady pressure to activate the glue and create a solid bond.
- Repeat this process for each remaining tab until all tabs are securely glued to the hoof.
Passendes Zubehör für deinen RUNA Klebeschlag
Hoofstar RUNA Special Super Glue – Flexible, Strong & PreciseOur special super glue is specifically designed for securing Hoofstar RUNA adhesive horseshoes. Thanks to its elastic curing, it remains flexible and ensures a durable, high-strength bond – perfect for keeping your RUNA hoof boots securely in place.Why choose our RUNA glue?✅ Optimal viscosity – Flows easily, distributes evenly, and allows for quick application.✅ High tensile strength – Withstands extreme stress for a secure and stable hold.✅ Precise application – Enables pinpoint accuracy for effortless and targeted bonding.Choose quality, durability, and maximum adhesion – for an adhesive horseshoe that truly lasts!Angaben zur Produktsicherheit:Sekundenkleber, Cyanacrylat Kleber, MD-Glue 4850Hersteller und verantwortliche Person:Marston-Domsel GmbH, Bergheimer Str. 15, 53909 Zülpich, www.marston-domsel.de
Our square nail file with a coarse grit of 80/80 is the ideal tool for the precise processing and repair of RUNA adhesive fittings. Thanks to its stable shape and double-sided grit, it offers reliable and even sanding performance.Grit 80/80: Coarse-grained and ideal for quick, effective corrections.Square shape: Enables precise work even in hard-to-reach areas.Use this file to remove excess glue from the hoof and RUNA adhesive shoeing. You can then simply glue the shoe back on. Size: 17.78 cm x 2.79 cm x 0.51 cmInformation on product safety:Nail file, file 80/80 grit Manufacturer:Room A2405, Building 2, HengyuJiacheng, Longgang District, 518000, Guangdong Province, ShenzhenE-mail: zpeizeng@gmail.com, Tel: +86 13631599510Responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
To ensure that your ‘Runa’ hoof boot is always securely fastened, we offer you a small replacement screw set with 2 screws and the matching nuts. Especially with intensive use, it can happen that a screw gets lost - with this set, you always have the right solution to hand.Perfect for private useThis set is ideal for horse owners who use their ‘Runa’ hoof boot regularly and want to ensure that it always fits perfectly. Each application requires two screws and nuts per shoe, and if a screw is missing, you have a replacement quickly to hand with this set. This way, you can easily reattach your hoof boot and your horse remains protected.Compact and practicalThe set contains exactly two screws and the corresponding nuts - exactly the amount you need for one shoe. This means you have everything you need to firmly reattach your hoof boot.High quality and durableThe nuts and bolts are made of durable, rustproof material that fulfils the requirements of the hoof boot sector. They are resistant to moisture, dirt and other influences that can occur during daily use and therefore offer a long service life.SummaryWith the replacement screw set for the ‘Runa’ hoof boot, you can be sure that you always have the right spare parts to hand. Two screws and nuts are all you need to reattach a hoof boot securely - ideal for end users.Product safety information:2 screws and 2 nuts for the RUNA adhesive horseshoe for size fixation Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com