Hoof rasps and hoof knives

Hoofstar RUNA Special Super Glue – Flexible, Strong & PreciseOur special super glue is specifically designed for securing Hoofstar RUNA adhesive horseshoes. Thanks to its elastic curing, it remains flexible and ensures a durable, high-strength bond – perfect for keeping your RUNA hoof boots securely in place.Why choose our RUNA glue?✅ Optimal viscosity – Flows easily, distributes evenly, and allows for quick application.✅ High tensile strength – Withstands extreme stress for a secure and stable hold.✅ Precise application – Enables pinpoint accuracy for effortless and targeted bonding.Choose quality, durability, and maximum adhesion – for an adhesive horseshoe that truly lasts!Angaben zur Produktsicherheit:Sekundenkleber, Cyanacrylat Kleber, MD-Glue 4850Hersteller und verantwortliche Person:Marston-Domsel GmbH, Bergheimer Str. 15, 53909 Zülpich, www.marston-domsel.de

Glue-U Shu Cleaner – Cleanliness that lastsWhen it comes to bonding, one thing matters most: a clean surface. The Glue-U Shu Cleaner makes it easy. Degrease the hoof, clean the surface – and you’ve got the perfect foundation for a strong, reliable adhesive bond.Especially with the RUNA adhesive shoe, degreasing is essential. Instead of struggling with alcohol wipes, simply use the spray: generously apply to the hoof, let it sit briefly, and blow dry – done. It couldn’t be more efficient.Acetone-free & residue-free: Evaporates cleanly without leaving traces.No wiping required: Unlike foam cleaners, no extra work needed.Quick application: Shake the can, spray – and the hoof is ready.For pros & practitioners: Saves time and ensures reliable results.Application:Shake can well before use. Generously spray the surface to be cleaned (hoof or adhesive area) from a distance of 20–30 cm. If necessary, work in with a brush. Spray again and allow to dry or blow dry.With Shu Cleaner, you’re on the safe side – because strong bonds always start with a clean surface.Product safety information:Acrylate adhesive in 150ml coaxial cartridge, ShubondManufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/

The Shubond acrylic adhesive from Glue-U is a high-quality 2-component acrylic-based adhesive that has been specially developed for bonding the Rally adhesive shoe from Hoofstar. With its longer working time and reliable curing, it is particularly easy to use and ideal for precise work. The 150 ml coaxial cartridge can be used with the Shubond dispensing gun or standard universal dispensing guns (silicone guns) if an adapter (available separately) is used. Advantages of the Shubond acrylic adhesive relaxed working: With an open working time of 90 to 120 seconds, the fitting can be glued on conveniently and precisely - ideal for users who need a little more time. Versatile in use: In addition to horseshoes such as the Hoofstar Rally, steel and aluminium can also be bonded. Reliable performance: Can be loaded quickly after 7-8 minutes, even at low temperatures.   Technical details Type: 2-component acrylate-based adhesive Working time (open time): 90-120 seconds Colour: Beige Content: 150 ml Mixing tips: Available separately and required for application.   Processing instructions Preheating in winter: The adhesive should be heated to 30 °C before use (not above 40 °C). The manufacturer does not guarantee optimum curing below 15 °C. No preheating in summer: Preheating is not necessary at higher temperatures.Comparison with PU adhesives Comparison with PU adhesives In contrast to fast-curing PU adhesives such as Shufix, Shubond acrylic adhesive offers a longer processing time. This enables a relaxed and more precise application of the adhesive fitting, without time pressure.   Product safety information: Acrylic adhesive in 150ml coaxial cartridge, Shubond Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/

The Shufix adhesive from Glue-U is a high-performance 2-component polyurethane adhesive (PU adhesive), specially developed for attaching the Rally adhesive horseshoe from Hoofstar. With its fast curing time and strong adhesion, it is the ideal solution for professional hoof protection applications. The 250 ml cartridge (coaxial cartridge) is compatible with common standard silicone presses or the PU squeeze gun from Hoofstar. Advantages of the Shufix adhesive Fast curing: The adhesive cures within 30 to 60 seconds and can be worked on after approx. 5 minutes. High adhesive strength: The PU base ensures a strong and durable bond between hoof and shoe. Easy to use: Compatible with standard and special spray guns for precise application. Professional quality: Specially developed for the requirements of equestrian sports. Technical details Type: 2-component PU-based adhesive Curing time: 30-60 seconds Can be processed after: approx. 5 minutes Colour: White Content: 250 ml Mixing tips: Available separately and required for correct application. Note: The appropriate mixing tips are sold separately and must be used for optimal mixing and performance.   Product safety information: Squeeze gun for Koxial cartridges 250 ml, PU adhesive squeeze gun Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/  

Pack of 10 mixing tips suitable for the following glues and hoof pads: SHUBOND (acrylic glue) 150 ml Shufix (PU glue) 250 ml Hoof pads Shupack soft and medium Shugard hoof pad hard Specially developed for use with adhesive fittings, these mixing nozzles enable precise and homogeneous mixing of the adhesive, which ensures optimum adhesion and longevity of the adhesive fitting. Key facts Hoofstar mixing tips: Precision mixing: guarantees an even mixture of the adhesive components, essential for excellent bonding results and the avoidance of air bubbles. Easy to use: Easy screw-on and hassle-free application allow for a quick and clean bonding process. Disposable design: Our mixing tips are designed for single use, which avoids cross-contamination and ensures optimum performance every time. Our mixing tips enable precise and safe application of hoof adhesives, whether for routine care or special corrective measures on the hoof.    Information on product safety: Mixing nozzles for use with hoof glue, mixing nozzles (pack of 10) Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/  

This universal squeeze gun is the perfect tool for precise squeezing of Shufix and Shupack adhesives. Developed for all 250 ml Koxial cartridges, it ensures even dosing and allows you to apply the adhesive or hoof padding effortlessly - whether you are repairing or gluing hoof boots and horseshoes. With a suitable adapter, the squeeze gun is also suitable for 150 ml Shubond cartridges, making it even more versatile. Thanks to its robust design and ergonomic handling, the gun sits securely in the hand and guarantees a long service life, even with regular use. Ideal for professionals and ambitious horse owners who prioritise quality and precision. Advantages: Compatible with all 250 ml Koxial cartridges (Shufix & Shupack) Can also be used for 150 ml Shubond cartridges with adapter Ergonomic design for comfortable handling Robust construction for professional use Precise and even adhesive dosing Make your work easier and achieve excellent results with the universal squeeze gun - indispensable for every hoof care set!   Information on product safety: Dispensing gun for adhesive Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/

Professional dispensing gun for hoof glue - ideal for 150ml Shubond glue cartridges Experience maximum efficiency and precision with our specially developed squeeze gun, which is perfect for use with hoof adhesives and hoof pads. Our gun has been specifically designed for 150ml Shubond glue cartridges and, unlike universal squeeze guns, does not require an additional adapter. This saves you time and improves handling during application. It can also be used for Shufix glue and hoof pads.  Superior functions for optimum performance: Powerful application: Thanks to a large force ratio of 25:1, the adhesive can be squeezed out easily and with minimal effort, which simplifies handling and enables fatigue-free work. Ideal for coaxial cartridges: The gun is specially designed for 2-component adhesives with a mixing ratio of 10:1, making it a must-have for any professional application. Robust construction: Manufactured from high-quality aluminium, the gun's half-shell offers lasting reliability and durability, even with regular intensive use. Adapter-free technology: The innovative split plunger of this squeeze gun enables direct and precise application of hoof glue without the complications of an adapter. Optimise your glue-on horseshoes: This dispensing gun is an indispensable tool for anyone who wants to professionally apply Hoofstar adhesive fittings. It ensures an even and controlled distribution of the adhesive, which significantly improves the durability and effectiveness of the adhesive shoeing. The easy handling and the special adaptation to the Shubond glue cartridges guarantee excellent results every time.   Information on product safety: Dispensing gun for adhesive Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/

Glue-u Shuguard is a harder, resilient hoof pad that fits into any standard dispensing gun (silicone gun) with a volume of 250 ml. The hoof pad provides support, protection and cushioning for the hoof sole. In the case of laminitis, the pad can be filled up to the ground. The pad can also be applied directly to the bare hoof. By supporting the sole, the pressure on the hoof wall is relieved and the growth of the heels is improved.  The pad takes around 2 minutes to harden, the initial hardening time (open time) is 35 seconds. The glue-u Shuguard pad can be used with all Hoofstar adhesive shoes. Mixing tips must be ordered for separetly (not included). The pads can be used with standard silicone dispensing guns or in the Shubond dispensing gun. Key facts Shuguard: Hardness grade A60 Hard, supportive filling material Remains stable during adhesive fitting, even in cold weather Self-adhesive Can be used with mesh, but is not a must 35 seconds curing time Becomes warm during curing Can be used as a snow grip in winter If you are looking for a softer pad, you can find it here under the name Shupack in the Shorehäre A30 and A50.   Product safety information: Hoof pads for horse hooves, Hoof Packing A25 Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/  

Glue-u Shupack (formerly Shufill Cushion) is a resilient hoof cushion in the hardness grades Soft (Shore hardness A30) and Medium (Shore hardness A50). With a capacity of 250 ml, the cartridges fit into any standard silicone applicator gun. The hoof pad provides support, protection and cushioning for the hoof sole. In the case of laminitis, the pad can be filled up to the ground. The use of a net (mesh net) is not essential, but recommended. This is also available in our shop. Shufill needs about 2 minutes to cure, the initial curing time (open time) is 35 seconds. The glue-u Shufill pad can be used with all Hoofstar glue fittings. Mixing tips must be ordered for separately (not included). The pads can be used with standard silicone dispense gun or in the Shubond dispensing gun. Shufill Cushion Soft (A30): Soft, shock-absorbing filling material. Remains soft, even in cold weather Self-adhesive Fill to the floor with mesh or use with Shupads 35 seconds curing time Becomes warm when cured Shufill Cushion Medium (A50): Medium strength, shock absorbing filler material Remains stable during adhesive fitting, even in cold weather Self-adhesive Application with mesh or with shupads 35 seconds curing time Becomes warm during curing The hard pad with Shore hardness A60 can be found here under the name Shuguard. In winter, the Shuguard pad can be used especially as a snow grip.    Information on product safety: Hoof pads for horse hooves, Shupack Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/

This Glue-U kneading pad is very easy to use. Simply take equal amounts of component A and component B and knead evenly. Then shape it into the desired form. As the pad is silicone-based, it does not stick to the hoof by itself. For this reason, mesh (a grid) or shupads must be used to make the pad stick to the hoof. To do this, cut the mesh to fit the size of the hoof, apply the pad to the hoof, place the mesh on top and place the Hoofstar Rally on top, which is then glued in place. The 2 components provide a total of 1.3 kilos of padding to work with. As a result, this pad is significantly cheaper than a pad for lace-in. Key Facts: Soft padding Non-toxic and skin-friendly (does not irritate or cause allergic reactions) Cure time 4-5 minutes (warmed 2-3 minutes) Can be combined with any medical application   Product safety information: Kneading pad for horse hooves, hoof pad made of two components, Hoof Packing A25 Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/

Mesh is used to integrate a pad into an glue-on horseshoe. The mesh ensures that the pad remains on the hoof. Application: Cut mesh to the size of the glue-on shoe and put it in the glue-on shoe, then glue it on. After the glue-on shoe has cured, insert the pad.   Mesh can be used for Glue-u Shufill, but also for other pads, for example from Luvex.   Size: 0,5 x 0,2 m   Information on product safety: Mesh Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/

Shupads are the basis for silicones and pads. The pads are supplied as a pack of 2 in the size of 15 x 15.5 cm and can be very easily cut to the correct hoof size with scissors or a nipper. The high quality urethane material ensures that the hoof mechanism is not restricted and keeps the pad in position. Experience shows that Glue-U Shupads are extra durable. Each Shupad is equipped with self-closing injection holes. This makes it easy to inject a liquid cushion into the shoe. The Shupads can also be used to create a floating toe by cutting out the toe and inserting it into the Hoofstar Rally. Key facts SHUPADS flat flex M Supplied in a pack of 2 Flat plate with 4 filling holes   Information on product safety: Insoles for hoof boots and adhesive shoes, insert pads, shupads Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/

You need mini stretch foil so that you can glue the hoof shoe Rally accurately to the hoof. The foil allows the hoof shoes to be glued to the ground with the hoof down. In contrast to commercially available foil from the DIY store or even plastic film, our mini stretch foil is much thicker and more tear-resistant with 35my. This is the only way to build up sufficient tension when wrapping the film (all other films tear beforehand). The film can be removed without leaving any residue, as it only sticks to itself. Are you buying it for the first time? Then buy the set with handle for easier handling. By the way, both are already included in our starter set. Scope of delivery: 1 roll Key-Facts Mini stretch film, transparent with protruding core Thickness of the film: 35 my Length of the roll: 150 m Width of the film: 100 mm Inner core diameter: 38 mm Core protrusion 1: 40 mm Tube protrusion 2: 5mm   Information on product safety: Film, LDPE stretch film, mini stretch film Manufacturer and responsible person: dm-folien GmbH, Markwiesenstraße 33, 72770 Reutlingen, produktsicherheit@dm-folien.de, https://www.dm-folien.com

The Hoofstar Mini Stretch Foil is particularly stable and tear-resistant with a thickness of 35my and therefore ideal for fixing the Hoofstar hoof shoes to the hoof. The protruding core and the ergonomic handle make it comfortable to hold and unwind. We deliver the foil in a set together with the handle, which makes it especially easy to use. Further rolls of mini stretch foil (without handle) are also available in our online shop. Why mini strech foil? You need mini stretch foil so that you can glue the hoof shoe Rally accurately to the hoof. The foil allows the hoof shoes to be glued to the ground with the hoof down. In contrast to commercially available foil from the DIY store or even plastic film, our mini stretch foil is much thicker and more tear-resistant with 35my. This is the only way to build up sufficient tension when wrapping the film (all other films tear beforehand). The film can be removed without leaving any residue, as it only sticks to itself. Are you buying it for the first time? Then buy the set with handle for easier handling. By the way, both are already included in our starter set. Scope of delivery: 1 roll Key-Facts Mini stretch film, transparent with protruding core Thickness of the film: 35 my Length of the roll: 150 m Width of the film: 100 mm Inner core diameter: 38 mm Core protrusion 1: 40 mm Tube protrusion 2: 5mm   Information on product safety: Film with stretch film dispenser, LDPE stretch film with handle, mini stretch film with stretch film dispenser handle Manufacturer and responsible person: dm-folien GmbH, Markwiesenstraße 33, 72770 Reutlingen, produktsicherheit@dm-folien.de, https://www.dm-folien.com

Adapter for the 150ml Shubond cartridges if they are to be squeezed out in a universal squeezing gun (silicone press). When using the squeeze gun from the starter set (Shubond squeeze gun), no adapter is necessary.   Information on product safety: Adapter for a dispensing gun for use with Shubond adhesive, adapter Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/