€9.90
% €12.00 (17.5% saved)
Available, delivery time: about 5-6 days
- Buy directly from the manufacturer
- Made in Germany
- Personalised advice
- Purchase comfortable on account
RUNA Repair Kit – Sticks like new
When removing the RUNA, the soft black inner material may come off or stick to the hoof – not a big deal, but essential for the next application. That’s exactly what our Repair Kit is for: it helps you get your RUNA back in shape in no time.
Perfect if you want to reuse your RUNA and count on a secure fit.
What’s included?
- Inner pads for 1 RUNA glue-on shoe
- 4 cleaning wipes
💡 Tip: Superglue doesn't stick to itself – make sure to remove old glue residues first. Best done with our cleaning brush for the cordless drill, available in our shop.
Mini File – Quick fix for glue areas
If a flap comes loose while you're out and about, our handy mini file is just what you need. Use it to roughen the surface quickly and precisely – for secure re-gluing at the barn or on the go. Fits in any pocket, a must-have in every tack room.
🔧 Available here: https://hoofstar.com/Feile-Miniraspel-runa
Product Safety Information:
Kit for repairing the side flaps of the RUNA glue-on shoe
Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Hoofstar – Innovation trifft Praxis
Bei Hoofstar stehen Technik und Innovation an erster Stelle – aber immer mit Blick auf das, was Pferd und Mensch wirklich brauchen. Als Hamburger Start-up entwickeln und produzieren wir unsere Klebebeschläge RUNA und RALLY komplett in Eigenregie.
Unser Anspruch? Hufschutz smarter machen. Deshalb arbeiten wir eng mit Reiterinnen, Hufbearbeiterinnen und Tierärzt*innen zusammen. Ihr Feedback fließt direkt in unsere Weiterentwicklung ein – für Klebebeschläge, die in der Praxis überzeugen.
Wir setzen auf hochwertige Materialien, clevere Designs und eine Produktion ohne unnötige Umwege. Das Ergebnis: Langlebige, pferdefreundliche Klebebeschläge, die sich perfekt an den Huf anpassen und einfach in der Anwendung sind.
Hoofstar – Technik, die sich anfühlt wie Barhuf.
Login
Size adjustment
First, place Runa on your horse's hoof to determine the right width. A correct fit is essential for the correct fit and durability of the glue-on shoe.
- Glue on shoe too wide?
If the shoe is too wide, you need to make it smaller. Place the shoe on the side edge and hit it once with a rubber mallet to reduce the shoe by one step. Repeat this process until the shoe is snug against the hoof and fits well. - Glue on shoe too tight?
If the shoe is too tight, it must be enlarged. Stand the shoe on end and hit the back edge once with a rubber mallet to enlarge the shoe by one step. Repeat this process until the shoe fits snugly without being too loose.
Fix size and degrease
Once the width of the glue-on fitting has been set correctly, this width must be fixed using the nuts and screws supplied.
- Insert the two nuts provided into the overlapping holes on the inside of the shoe. Press the nuts in firmly so that they are secure.
- On the underside of the shoe, use the Allen key to screw in the supplied screws until they are fully countersunk and flush with the underside of the shoe.
- Check the fit again to ensure that the shoe still fits perfectly after fixing.
Prepare the hoof: Clean the hoof thoroughly with a lint-free (!) alcohol wipe to remove dirt, grease and other impurities. A clean surface is important for the adhesive to adhere. Then clean the inside of the hoof thoroughly with a lint-free, alcohol-soaked cloth.
Glue RUNA
As soon as the size is fixed, you can attach the glue-on shoe to the hoof.
- Put the shoe on: Pull the shoe onto the hoof and check the fit again to make sure it is correct and comfortable.
- Attach the glue-on tabs: Start with the rear flaps, each flap must be glued individually and in sequence. Glue the rear left tab first, then the rear right tab, and then work your way forwards.
- Bend the flap outwards for gluing so that the inside of the flap is accessible.
- Apply 1-2 drops of glue thinly (!) to the inside of the flap. Make sure to use as little glue as possible to ensure even distribution and strong adhesion (no adhesion if too much glue is used)
- Place the flap on the hoof and press it down for 5 seconds with even pressure to activate the adhesive and achieve a secure bond.
- Repeat this process for each additional flap until all flaps are firmly and securely glued to the hoof.