RUNA Orange Gr. 10 Einzelschuh
€37.00
Available, delivery time: about 5-6 days
- Buy directly from the manufacturer
- Made in Germany
- Personalised advice
- Purchase comfortable on account
Hoofstar RUNA Klebebeschlag – Sonderfarbe Neon-Orange (limitiert)
Auffällig, sicher, easy geklebt: Unser RUNA in knalligem Orange sorgt für maximale Sichtbarkeit und bewährten Schutz – perfekt für Training, Ausritt & Offenstall (mit Rücksicht auf Herdenhaltung, siehe Hinweis). Die Sonderedition ist exklusiv in Größe 10 verfügbar und auf nur 40 Stück limitiert. Wenn weg, dann weg.
Highlights
-
Sonderfarbe Neon-Orange – starke Sichtbarkeit & frischer Look (Limited Edition).
-
RUNA = fertig & anpassbar – kein Schweißen, kein Zuschneiden; Größe per Verzahnung einstellen, anschließend mit Schrauben fixieren.
-
Offene Sohle – leicht, flexibel, nah am Barhuf-Gefühl.
-
Schnelle Montage – Klebelaschen zügig anlegen, wenige Sekunden andrücken.
-
Optional mehr Grip – vorgebohrte Löcher für Widia-Stifte (Wolframcarbid), wiederverwendbar, ideal bei Nässe, Eis oder Asphalt.
-
Made in Germany – Entwicklung, Test & Produktion im Norden.
Passform & Größe
-
Verfügbar nur in Größe 10 (limitiert auf 40 Stück).
-
Für die Größenfindung gilt: Breiteste Stelle des Hufs messen, RUNA am Huf probeaufsetzen, Verzahnung einklicken, mit Schrauben sichern – für passgenauen Sitz.
Montage – kurz & klar
-
Huf vorbereiten: Klebeflächen gründlich mit der feinen Raspelseite anrauen; Huf muss sauber, trocken, nicht geölt und nicht entfettet sein. Nach dem Anrauen nicht mehr mit bloßen Händen berühren.
-
RUNA einstellen & fixieren: Verzahnung einklicken, mit Schrauben gegen Verstellen sichern.
-
Laschen kleben: Laschen einzeln abspreizen, Kleber auftragen, 5–10 Sek. andrücken; danach Überstände sauber verrunden/kürzen.
Tipp: Für zusätzliche Traktion Widia-Stifte einschrauben (bis zu 6 pro Huf). Bei Hinterhufen & im Herdenbetrieb mit Bedacht einsetzen (Verletzungsrisiko). Nicht für häufiges Ein-/Ausschrauben gedacht.
Warum Klebebeschläge?
Kunststoff-Klebebeschläge sind leicht, stoßdämpfend und laufen sich nahezu wie barhuf. Sie sind eine hervorragende Alternative, wenn Nageln nicht gewünscht ist oder Hufschuhe an Grenzen stoßen.
Andere Größe gesucht? Schau dir RUNA WINTERSONNE in Orange an
Angaben zur Produktsicherheit:
Klebelaschen System RUNA Orange, Set mit Kleber und Alkoholtuch mit Schrauben und Mutter oder als Einzelschuh mit Schrauben und Muttern
Hersteller und verantwortliche Person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
YouTube
Hoofstar – Innovation trifft Praxis
Bei Hoofstar stehen Technik und Innovation an erster Stelle – aber immer mit Blick auf das, was Pferd und Mensch wirklich brauchen. Als Hamburger Start-up entwickeln und produzieren wir unsere Klebebeschläge RUNA und RALLY komplett in Eigenregie.
Unser Anspruch? Hufschutz smarter machen. Deshalb arbeiten wir eng mit Reiterinnen, Hufbearbeiterinnen und Tierärzt*innen zusammen. Ihr Feedback fließt direkt in unsere Weiterentwicklung ein – für Klebebeschläge, die in der Praxis überzeugen.
Wir setzen auf hochwertige Materialien, clevere Designs und eine Produktion ohne unnötige Umwege. Das Ergebnis: Langlebige, pferdefreundliche Klebebeschläge, die sich perfekt an den Huf anpassen und einfach in der Anwendung sind.
Hoofstar – Technik, die sich anfühlt wie Barhuf.
Login
Size Adjustment
4 adjustment levels – from narrow to wide. The shoe comes preset to the middle position.
🔧 How to adjust:
- Remove the triangular bridge piece.
- Click the pins into the next slot for the desired width.
- Tip: Are the holes aligned in a straight line? Then you've found the right position – now click the shoe into place.
💡 Tip for wider settings:
- Click in and screw one side first.
- Then gently bend the shoe open and click in the second side.
Lock the Size & Degrease
Once you've adjusted the width of the glue-on shoe correctly, it needs to be fixed in place using the included nuts and screws.
- Insert the two included nuts into the aligned holes on the inside of the shoe. Press them in firmly so they stay securely in place.
- Insert the screws from the underside. Make sure to screw them in straight (!!), not at an angle – otherwise, they may strip and won’t hold properly.
- Use the Allen key to tighten the screws until they are completely recessed and flush with the sole of the shoe.
- Double-check that the shoe still fits perfectly after tightening.
Prepare the hoof: Use a hoof rasp to remove dirt and patina from the glue surface. Finish with the fine side to create a smooth surface.
Thoroughly clean the hoof with a lint-free alcohol wipe to remove any dirt, grease, or residue. A clean surface is essential for proper glue adhesion. Then clean the inside of the shoe with a lint-free alcohol wipe as well.
Gluing on the Runa
Once the size is locked in, you're ready to attach the glue-on shoe to the hoof.
- Put on the shoe: Slip the shoe onto the hoof and check the fit again to ensure it's sitting correctly and comfortably.
- Attach the glue tabs: Start with the rear tabs, gluing each one individually. Begin with the left rear tab, then the right rear, and work your way forward.
- Bend the tab outward so the inside is accessible for gluing.
- Apply 1–2 small drops of glue thinly (!) to the inside of the tab. Use as little glue as possible to ensure even spreading and strong adhesion (too much glue reduces bonding strength).
- Press the tab against the hoof and hold for 5 seconds with steady pressure to activate the glue and create a solid bond.
- Repeat this process for each remaining tab until all tabs are securely glued to the hoof.
Das passt gut zum Hoofstar Klebebeschlag
Snow Grip for Hoofstar RUNA Everything for secure footing in winter: The Snow Grip for Hoofstar RUNA is inserted into the RUNA glue-on shoe and reliably prevents snow and mud from “balling up” in the open sole. This keeps the tread surface clear – your horse has noticeably better traction in slush, on wet grass, and on frozen ground. Product Highlights No more snowballing – keeps the RUNA sole clear in winter Precision fit for Hoofstar RUNA – screws into the shoe, nothing wobbles or rubs Flush-mounted – the supplied screws are fully countersunk, no contact with the hoof Light & robust – unobtrusive in use, clearly effective Install before gluing – quick to fit, then glue on the RUNA as usual Important sizing note Please always order the matching size: For each RUNA shoe size you need the identical Snow Grip size. Available for all RUNA sizes (sizes 10 to 14). (Example: RUNA size 12 ⇒ Snow Grip size 12.) Assembly (before gluing) Check/set the RUNA size. Place the Snow Grip in the designated position and screw it firmly with the included screws – countersink all screws completely flush. Glue the RUNA to the hoof as usual. Notes Only suitable for Hoofstar RUNA. Please install before the gluing process. Scope of delivery 2× Snow Grip inserts (for one pair of RUNAs) 4× countersunk screws 4× press-in nuts 1× hex key Questions about sizing or installation? Get in touch – we’ll help you quickly. 🧡 Product safety information: RUNA Snow Grip (2 pieces) for inserting into the RUNA glue-on shoe Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Content: 2 piece (€7.90 / 1 piece)
Hoofstar RUNA wedges – insert for the glue-on shoe (therapeutic, 1–5°) Precision wedges for angle adjustment in the RUNA glue-on shoe. The inserts are sold individually per shoe – so you can use different heights on the left and right when this makes therapeutic sense. Developed exclusively for RUNA (not compatible with other Hoofstar glue-on products). Use & benefits Wedges can – in consultation with your veterinarian and a professional hoof care provider – help to fine-tune the hoof angle, temporarily relieve the heels and optimise breakover. This can be useful, for example, for temporary corrections of toe/heel alignment, during rehabilitation or for fine balance adjustment of individual hooves. Important notes Therapeutic product: use only by professional hoof trimmers/farriers or where a veterinarian recommends the use of a wedge. Compatibility: exclusively for Hoofstar RUNA. Unit: 1 wedge (per hoof). Variants: 1–5° (in 1° increments), sizes matching RUNA (e.g. 10–14). Custom height needed? We manufacture special sizes on request – please email us at info@hoofstar.com Installation video: In our video we show how the wedges are installed in the RUNA glue-on shoe. Key benefits at a glance Perfect fit for RUNA – quick to insert, secure fit Fine degree increments for therapeutic adjustments Available individually → allows asymmetric adjustments Developed & produced in Germany Note: wedges change hoof mechanics. Please always determine diagnosis, wedge angle and wear duration together with qualified professionals. Product safety information: RUNA wedge (1 piece), plate to be placed in the RUNA glue-on shoe Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Untamed energy, dynamic drive, explosive power – concentrated in an elegant design that can be glued on in minutes. The RUNA “Fire Horse” Edition celebrates the Chinese Year of the Horse with a bold look: one side red, one side orange. Visible. Full of character. 100% RUNA glue-on horseshoe. Why RUNA “Fire Horse”? Power at the hoof: The red/orange duo stands for forward drive and presence – perfect for training, trail rides, and competitions. Elegance meets simplicity: RUNA arrives ready to use. In just a few minutes you adjust it – without tinkering, without tech stress, and without any crafts background. Quick to glue: Apply super glue thinly, press each tab evenly for 5–10 sec. – done. Secure hold: On degreased, dry, freshly roughened horn, the glue-on shoe holds reliably. Made in Germany: Developed and produced in Nordfriesland – made locally, shipped directly. Application in 4 steps (RUNA glue-on horseshoe) Adjust: Set the RUNA glue-on horseshoe to the hoof width and lock it in place (simple screw click system). Roughen: Carefully roughen the hoof wall with the fine side of the rasp (remove patina/dirt). Degrease: Clean with an alcohol wipe (included in the starter set) and let it evaporate briefly. After that, do not touch with bare hands. Glue: Apply super glue thinly to each tab, press 10 sec. per tab. Let it cure briefly – and you’re ready to go. Good to know Limited Edition: available only while supplies last. Repairable: With the RUNA Repair Kit, the inner liner can be replaced if needed – remove/file off old glue residue beforehand. Choosing the size: As usual with RUNA, choose based on hoof width. Fire Horse size chart Size Hoof width Max. hoof length 14 13.8 – 14.7 cm 14.5 cm 13 12.7 – 13.9 cm 14 cm 12 11.6 – 12.8 cm 13 cm 11 10.9 – 11.9 cm 12 cm 10 9.7 – 10.9 cm 10.9 – 11.1 cm Between two sizes? Wider at the heels (triangular)? → choose the smaller size and adjust it to the maximum width. More round? → choose the larger size and adjust it as small as possible. Product safety information Glue-tab system RUNA Fire Horse, as a set with glue and alcohol wipe including screws and nut, or as a single shoe with screws and nuts. Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Subtle, clean and elegant – RUNA in White is the discreet alternative for everyone who does not want a black glue-on hoof protection, but also does not want bright colors on the hoof. Especially on light-colored hooves, white RUNA blends in very harmoniously and looks pleasantly understated. 100% RUNA glue-on hoof protection. Why RUNA White? Discreet on light-colored hooves: The white color matches light horn particularly well and looks much more subtle than black. Clean instead of colorful: Ideal for everyone who likes a simple look – no black, no bright colors, just a calm, elegant appearance. Elegance meets simplicity: RUNA arrives ready to use. You can adjust it in just a few minutes – without crafting, without technical stress and without a professional background. Quick to glue: Apply superglue in a thin layer, press each tab evenly for 5–10 sec. – done. Reliable hold: On degreased, dry and freshly roughened horn, the glue-on hoof protection holds reliably. Made in Germany: Developed and produced in Northern Frisia – regionally manufactured, delivered directly. Application in 4 steps (RUNA glue-on hoof protection) Adjust: Adjust the RUNA glue-on hoof protection to the hoof width and fix it in place. Roughen: Carefully roughen the hoof wall with the fine side of the rasp so that patina and dirt are removed. Degrease: Clean with an alcohol wipe and allow it to evaporate completely. Do not touch the prepared bonding surface afterwards to avoid contamination. Glue: Apply superglue in a thin layer to each tab and press the tab evenly with both thumbs for 5–10 sec. The tab is then permanently fixed. Good to know Subtle color option: RUNA White is perfect for light-colored hooves and for everyone who prefers a simple look. Repairable: With the RUNA Repair Kit, the inner lining can be renewed if needed – old glue residues must be thoroughly removed/filed off beforehand. Choosing the right size: As usual with RUNA, choose the size according to the hoof width. Size chart RUNA White Size Hoof width Max. hoof length 14 13.8 – 14.7 cm 14.5 cm 13 12.7 – 13.9 cm 14 cm 12 11.6 – 12.8 cm 13 cm 11 10.9 – 11.9 cm 12 cm 10 9.7 – 10.9 cm 10.9 – 11.1 cm Between two sizes? Wider towards the heels / rather triangular hoof? → Choose the smaller size and adjust it as wide as possible. Rather round hoof? → Choose the larger size and adjust it as small as possible. Product safety information Glue-on tab system RUNA White, available as a set including glue, alcohol wipe, screws and nuts or as a single shoe with screws and nuts. Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Hoofstar RUNA Special Super Glue – Flexible, Strong & Precise Our special super glue is specifically designed for securing Hoofstar RUNA adhesive horseshoes. Thanks to its elastic curing, it remains flexible and ensures a durable, high-strength bond – perfect for keeping your RUNA hoof boots securely in place. Why choose our RUNA glue? ✅ Optimal viscosity – Flows easily, distributes evenly, and allows for quick application.✅ High tensile strength – Withstands extreme stress for a secure and stable hold.✅ Precise application – Enables pinpoint accuracy for effortless and targeted bonding. Choose quality, durability, and maximum adhesion – for an adhesive horseshoe that truly lasts! Storage and shelf life of the RUNA super glue: It is best to store your glue in the refrigerator. At 6 to 8 degrees Celsius, the glue has a shelf life of approximately 12 months. When stored at room temperature, it has a shelf life of approximately 6 months. Product safety information: Super glue, cyanoacrylate adhesive, MD-Glue 4850 Manufacturer and responsible person: Marston-Domsel GmbH, Bergheimer Str. 15, 53909 Zülpich, www.marston-domsel.de
Content: 0.02 Kilogramm (€345.00 / 1 Kilogramm)