Hoofstar RUNA Wedge (1–5°)
€11.90
Available, delivery time: 8 bis 11 Werktage
- Buy directly from the manufacturer
- Made in Germany
- Personalised advice
- Purchase comfortable on account
Hoofstar RUNA Wedges – Inserts for the Glue-On Shoe (1–5°)
The RUNA wedges are inserts for adjusting the angle of the Hoofstar RUNA glue-on shoe. They are sold individually per shoe. This means that, where professionally appropriate, different heights can be used on the left and right. The wedges are available in sizes 10 to 14 and in increments from 1° to 5°. They are compatible exclusively with the RUNA glue-on shoe.
Important information on use
Wedges alter hoof mechanics. Please always determine the diagnosis, the appropriate wedge angle and the duration of use together with a veterinarian and a professional hoof care specialist.
Wedge height depending on RUNA size
The degree value indicates the angle of the wedge. As the RUNA glue-on shoe varies in length depending on the size, the actual wedge height also differs.
The table shows the height of the wedge in millimetres at the heel area.
Example: With RUNA size 14, the 3° wedge is 9.8 mm high at the rear end.
| Size | 1 degree | 2 degrees | 3 degrees | 4 degrees | 5 degrees |
|---|---|---|---|---|---|
| 14 | 4.3 | 7 | 9.8 | 12.6 | 15.4 |
| 13 | 4 | 6.7 | 9.2 | 11.8 | 14.4 |
| 12 | 3.9 | 6.3 | 8.7 | 11 | 13.5 |
| 11 | 3.7 | 5.9 | 8.1 | 10.3 | 12.5 |
| 10 | 3.5 | 5.5 | 7.5 | 9.5 | 11.5 |
Use and benefits
In consultation with a veterinarian and a professional hoof care specialist, wedges can help to fine-tune the hoof angle, temporarily relieve the heel area and adjust the breakover point. Possible uses may include temporary corrections of toe or heel position, rehabilitation or fine-tuning the balance of individual hooves.
Installation and custom heights
Installation video: In the video, we show you how to insert the wedges into the RUNA glue-on shoe.
Do you need a custom wedge height? We can also produce custom sizes by prior arrangement. Please contact us at info@hoofstar.com.
Advantages at a glance
- Designed to fit RUNA precisely and quick to insert
- Fine increments from 1° to 5° for professionally supervised adjustments
- Available individually – different heights can be used on the left and right
- Developed and manufactured in Germany
Product safety information:
RUNA wedge (1 piece), insert plate for the RUNA glue-on shoe.
Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Hoofstar – Innovation Meets Practice
At Hoofstar, we combine technical development with what horses and people need in everyday life. We are based in North Frisia (Germany) and manufacture the RUNA glue-on horseshoe entirely ourselves: Every component and every production step is carried out locally – exclusively in North Frisia, Germany.
Our goal? To make hoof protection smarter. That is why we work closely with riders, hoof care professionals and veterinarians. Their feedback flows directly into our ongoing development – creating glue-on horseshoes that prove themselves in everyday use.
We rely on high-quality materials, well-thought-out design and streamlined production processes. The result: Durable, horse-friendly glue-on horseshoes that adapt perfectly to the hoof and are easy to use.
Hoofstar – Technology that feels like barefoot.
Login
Verwendbar hierfür
RUNA Glue-On: fast, clean, strong RUNA is the smart glue-on hoof protection that works instantly: No welding, no trimming, no special tools. Set the size, apply superglue – done. Comfort without compromise: Adjust the size using the included bridges. Simply snap in and secure with the recessed screw. The starter kit includes everything: glue, cleaning wipe, screws, instructions. Why RUNA? ✅ Ultra-fast application Each tab fixed in seconds – while your horse stands relaxed. No tinkering, no holding the hoof up. ✅ Mobility that adapts Flexible plastic hugs the hoof contour. Supports natural hoof mechanics – no metal core. ✅ Reusable & sustainable Re-glue after hoof care and keep riding. Saves money and resources. Color: Arctic Berry Monochrome. Clean. Bold. RUNA in Arctic Berry sets a calm, modern accent – pure look instead of color mix. Application – step by step Preparation: Thoroughly roughen the hoof with the fine side of a hoof rasp. Do not degrease or oil. Keep the rasp clean. After roughening, do not touch with bare hands. Adjustment: Set the size, snap in the bridge, secure with the recessed screw. Bonding: Use superglue (RUNA) on clean, dry, fresh horn – done. All steps in the video tutorial. Variants & prices Starter kit (1 pair RUNA + glue + cleaning wipe + instructions) – €75 Single shoe – €37 Size chart Size Hoof width Max. hoof length 14 13.8–14.7 cm 14.5 cm 13 12.7–13.9 cm 14 cm 12 11.6–12.8 cm 13 cm 11 10.9–11.9 cm 12 cm Between two sizes? Wider towards the heels (triangular)? → Choose the smaller size and set it to the maximum width. More round? → Choose the larger size and set it as small as possible. Why Hoofstar? Since 2016: simple, durable, well-thought-out hoof protection – Made in Germany. RUNA unites function, comfort, and sustainability. 👉 Order RUNA in Arctic Berry Product safety information Glue tabs system RUNA Arctic Berry, as a set with glue and alcohol wipe incl. screws and nut, or as a single shoe with screws and nuts. Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
What is the Hoofstar Glue Tab System? No welding, no trimming, and no tools are needed for the RUNA glue-on shoe. You receive a ready-to-use hoof protection that just needs to be attached to the hoof with super glue. Thanks to the unique tap-to-fit mechanism, you can adjust the size to the millimeter – no complicated fitting required. Everything you need for the application comes in the starter kit – including glue, cleaning wipe, and illustrated instructions. Why RUNA? Quick and easy to apply: Each glue tab is attached within seconds while your horse stands comfortably. No tools required – the size is adjusted with a simple tap. Maximum comfort & freedom of movement The flexible plastic perfectly adapts to the hoof. Natural hoof movement remains unrestricted. Shoe without metal core. Reusable & sustainable: Reusable multiple times: Remove, trim the hooves, and glue them back on. Saves money and resources! How it works: Preparation: Roughen the hoof wall with a rasp and make sure it’s clean and dry. Adjustment: Set the correct size. Application: Secure to the hoof with just 10 tabs and super glue. Done – your horse can walk off right away! 🐎 Which version suits you? Starter Kit (1 pair of RUNA + glue + cleaning wipe + instructions) – €69 Single shoe – €32 Size Chart Size Hoof Width Max. Hoof Length 14 13.8 - 14.7 cm 14.5 cm 13 12.7 - 13.9 cm 14 cm 12 11.6 - 12.8 cm 13 cm 11 10.9 - 11.9 cm 12 cm 10 9.7 - 10.9 cm 10.9 - 11.1 cm Is your horse between two sizes? Then take a close look at the hoof shape: Does the hoof widen toward the heel (triangular shape)? → Choose the smaller size and adjust it to the widest setting. Is the hoof more round? → Choose the larger size and adjust it to the smallest setting. Why Hoofstar? Hoofstar stands for innovative, sustainable, and horse-friendly hoof protection solutions. RUNA is the perfect alternative to traditional horseshoes or glue-on systems – lightweight, durable & reusable. 👉 Order your RUNA glue-on shoe now and take your hoof care to the next level! Product safety information: RUNA Glue Tab System – set including glue and alcohol wipe, with screws and nuts, or as a single shoe with screws and nuts. Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Auch nützlich
Spikes for the Hoofstar Rally or Hoofstar Swift. We recommend 6 spikes per shoe / hoof. Sold in packs of 12. This means that 24 spikes (2 sets) are needed for a full shoeing. To turn the spikes into the shoe, a spike key is needed. This can be ordered in the "set with spike key". The spike key only needs to be purchased once and can be used again and again. The spike key is inserted into a cordless drill like a bit. It keeps the spikes and screws them in. The pre-drilled holes in the Hoofstar Rally can be used. If more spikes are used than there are holes, they must be pre-drilled approx. 3 mm. Only then can the spikes be inserted. Size of the spikes: 7.9 x 9.8 mm Retractable area: 7.9 mm Overhanging area: 1.9 mm Information on product safety: Widia pins for horse shoes and adhesive shoeing, screw spikes type 1100 Manufacturer and responsible person: Bestgrip S.r.l. Via Ca' dell'Agro 100, 24024 Gandino (Bg) Italy, info@best-grip.com
Shupads are the basis for silicones and pads. The pads are supplied as a pack of 2 in the size of 15 x 15.5 cm and can be very easily cut to the correct hoof size with scissors or a nipper. The high quality urethane material ensures that the hoof mechanism is not restricted and keeps the pad in position. Experience shows that Glue-U Shupads are extra durable. Each Shupad is equipped with self-closing injection holes. This makes it easy to inject a liquid cushion into the shoe. The Shupads can also be used to create a floating toe by cutting out the toe and inserting it into the Hoofstar Rally. Key facts SHUPADS flat flex M Supplied in a pack of 2 Flat plate with 4 filling holes Information on product safety: Insoles for hoof boots and adhesive shoes, insert pads, shupads Manufacturer and responsible person: Glue-U Adhesives B.V., Droogdokkeneiland 8, 5026 SR Tilburg, Netherlands, https://www.glue-u.com/
Hoofstar RUNA Special Super Glue – Flexible, Strong & Precise Our special super glue is specifically designed for securing Hoofstar RUNA adhesive horseshoes. Thanks to its elastic curing, it remains flexible and ensures a durable, high-strength bond – perfect for keeping your RUNA hoof boots securely in place. Why choose our RUNA glue? ✅ Optimal viscosity – Flows easily, distributes evenly, and allows for quick application.✅ High tensile strength – Withstands extreme stress for a secure and stable hold.✅ Precise application – Enables pinpoint accuracy for effortless and targeted bonding. Choose quality, durability, and maximum adhesion – for an adhesive horseshoe that truly lasts! Storage and shelf life of the RUNA super glue: It is best to store your glue in the refrigerator. At 6 to 8 degrees Celsius, the glue has a shelf life of approximately 12 months. When stored at room temperature, it has a shelf life of approximately 6 months. Product safety information: Super glue, cyanoacrylate adhesive, MD-Glue 4850 Manufacturer and responsible person: Marston-Domsel GmbH, Bergheimer Str. 15, 53909 Zülpich, www.marston-domsel.de
Content: 0.02 Kilogramm (€345.00 / 1 Kilogramm)
Our square nail file with a coarse grit of 80/80 is the ideal tool for the precise processing and repair of RUNA adhesive fittings. Thanks to its stable shape and double-sided grit, it offers reliable and even sanding performance.Grit 80/80: Coarse-grained and ideal for quick, effective corrections.Square shape: Enables precise work even in hard-to-reach areas.Use this file to remove excess glue from the hoof and RUNA adhesive shoeing. You can then simply glue the shoe back on. Size: 17.78 cm x 2.79 cm x 0.51 cmInformation on product safety:Nail file, file 80/80 grit Manufacturer:Room A2405, Building 2, HengyuJiacheng, Longgang District, 518000, Guangdong Province, ShenzhenE-mail: zpeizeng@gmail.com, Tel: +86 13631599510Responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
RUNA Repair Kit – Sticks like newWhen removing the RUNA, the soft black inner material may come off or stick to the hoof – not a big deal, but essential for the next application. That’s exactly what our Repair Kit is for: it helps you get your RUNA back in shape in no time.Perfect if you want to reuse your RUNA and count on a secure fit.What’s included?Inner pads for 1 RUNA glue-on shoe4 cleaning wipes💡 Tip: Superglue doesn't stick to itself – make sure to remove old glue residues first. Best done with our cleaning brush for the cordless drill, available in our shop.Mini File – Quick fix for glue areasIf a flap comes loose while you're out and about, our handy mini file is just what you need. Use it to roughen the surface quickly and precisely – for secure re-gluing at the barn or on the go. Fits in any pocket, a must-have in every tack room.🔧 Available here: https://hoofstar.com/Feile-Miniraspel-runaProduct Safety Information:Kit for repairing the side flaps of the RUNA glue-on shoeManufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
You will need this cleaning brush if you need to use the RUNA adhesive fitting again and the black inner material has come loose or is uneven. Key-Facts: Ø 38 mm diameter brush Weight 30 g Disc brush with 6 mm clamping shaft for clamping in the drill Speed, max. min-1: 4500 rpm Safety instructions: Please wear safety goggles, dust mask and work gloves during use. Information on product safety: Accessories for drill, disc bits 38 mm diameter Manufacturer and responsible person: Robert Bosch Power Tools GmbH, Max-Lang-Strasse 40-46, 70771 Leinfelden-Echterdingen, https://www.bosch-pt.com
To ensure that your ‘Runa’ hoof boot is always securely fastened, we offer you a small replacement screw set with 2 screws and the matching nuts. Especially with intensive use, it can happen that a screw gets lost - with this set, you always have the right solution to hand.Perfect for private useThis set is ideal for horse owners who use their ‘Runa’ hoof boot regularly and want to ensure that it always fits perfectly. Each application requires two screws and nuts per shoe, and if a screw is missing, you have a replacement quickly to hand with this set. This way, you can easily reattach your hoof boot and your horse remains protected.Compact and practicalThe set contains exactly two screws and the corresponding nuts - exactly the amount you need for one shoe. This means you have everything you need to firmly reattach your hoof boot.High quality and durableThe nuts and bolts are made of durable, rustproof material that fulfils the requirements of the hoof boot sector. They are resistant to moisture, dirt and other influences that can occur during daily use and therefore offer a long service life.SummaryWith the replacement screw set for the ‘Runa’ hoof boot, you can be sure that you always have the right spare parts to hand. Two screws and nuts are all you need to reattach a hoof boot securely - ideal for end users.Product safety information:2 screws and 2 nuts for the RUNA adhesive horseshoe for size fixation Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Snow Grip for Hoofstar RUNA Everything for secure footing in winter: The Snow Grip for Hoofstar RUNA is inserted into the RUNA glue-on shoe and reliably prevents snow and mud from “balling up” in the open sole. This keeps the tread surface clear – your horse has noticeably better traction in slush, on wet grass, and on frozen ground. Product Highlights No more snowballing – keeps the RUNA sole clear in winter Precision fit for Hoofstar RUNA – screws into the shoe, nothing wobbles or rubs Flush-mounted – the supplied screws are fully countersunk, no contact with the hoof Light & robust – unobtrusive in use, clearly effective Install before gluing – quick to fit, then glue on the RUNA as usual Important sizing note Please always order the matching size: For each RUNA shoe size you need the identical Snow Grip size. Available for all RUNA sizes (sizes 10 to 14). (Example: RUNA size 12 ⇒ Snow Grip size 12.) Assembly (before gluing) Check/set the RUNA size. Place the Snow Grip in the designated position and screw it firmly with the included screws – countersink all screws completely flush. Glue the RUNA to the hoof as usual. Notes Only suitable for Hoofstar RUNA. Please install before the gluing process. Scope of delivery 2× Snow Grip inserts (for one pair of RUNAs) 4× countersunk screws 4× press-in nuts 1× hex key Questions about sizing or installation? Get in touch – we’ll help you quickly. 🧡 Product safety information: RUNA Snow Grip (2 pieces) for inserting into the RUNA glue-on shoe Manufacturer and responsible person: Hoofstar, Vladimir Joffe, Mirebüll 3, 25858 Högel, Germany, www.hoofstar.com
Content: 2 piece (€7.90 / 1 piece)